Lazer zxr

[moth898]

Originally Posted by isobarik

Yeah rons car look nice in red and what was it was somone here owing me money .......... mohaaa...... why cant jimmy put up an evil grin smiley ..... i know i will use it....


Ron you got to make some carbon lipo trays damn that will be sexy ....

Btw i got some wasp belt the orange ones the header says pink but they where very orange ones i have the motor plate/rear upperdeck mount from mms and shall i open them.......

mvh Isobarik

Schumacher makes a nice lipo tray for saddles that can be split.

[lllyf]

Really want to know who made these ever?

[Welshy40]

Originally Posted by isobarik

Yeah rons car look nice in red and what was it was somone here owing me money .......... mohaaa...... why cant jimmy put up an evil grin smiley ..... i know i will use it....


Ron you got to make some carbon lipo trays damn that will be sexy ....

Btw i got some wasp belt the orange ones the header says pink but they where very orange ones i have the motor plate/rear upperdeck mount from mms and shall i open them.......

mvh Isobarik

Mate id like to see the rear mms mount.

[Welshy40]

Originally Posted by lllyf

Really want to know who made these ever?

I dont know who but do know why. I think this is for the alpha or the cheapo zxr sport where the car was designed around a stick pack so explains why no cell holes. The chasdis does seem based around a stick pack and looks good. Nice find, now youll need a lipo tray.

[isobarik]

Originally Posted by Welshy40

I dont know who but do know why. I think this is for the alpha or the cheapo zxr sport where the car was designed around a stick pack so explains why no cell holes. The chasdis does seem based around a stick pack and looks good. Nice find, now youll need a lipo tray.

I was thinking the same .....

mvh isobarik

[isobarik]

Originally Posted by Welshy40

Mate id like to see the rear mms mount.

Welsh
well you have sen that mount and you have had them in youre hands and you have sended them to me since they where mine remember ???

Illyf
thats just sexy looking good

mvh Isobarik

[Welshy40]

Originally Posted by isobarik

Welsh
well you have sen that mount and you have had them in youre hands and you have sended them to me since they where mine remember ???

Illyf
thats just sexy looking good

mvh Isobarik

Iso,

Yup I remember. Dozy me

[Welshy40]

Anyone seen that Traxxas TRX3 on ebay for the last couple of months. Over priced big time. I reckon he would get £80 for it not £180.

[oosh123]

Anyone know what's the specification for the internal gear or spline that the small pulley have (The ones inside the rear gear box).

I am having trouble finding what the spec is.

[rondoolaa]

Originally Posted by isobarik

Yeah rons car look nice in red and what was it was somone here owing me money .......... mohaaa...... why cant jimmy put up an evil grin smiley ..... i know i will use it....


Ron you got to make some carbon lipo trays damn that will be sexy ....

Btw i got some wasp belt the orange ones the header says pink but they where very orange ones i have the motor plate/rear upperdeck mount from mms and shall i open them.......

mvh Isobarik

please dont ask me to get rid of my lazer stuff, its took ages to get this red stuff together,


i can give you the cash via paypal instantly if you want,

[rondoolaa]

Originally Posted by oosh123

You meant the slot in the middle??

Don't worry welshy, That's not for a belt tensioner mount. It's only to reduce the weight of this brace. Trust me I bought this part NIB.

BTW, ron, this brace is for sale if you want a better looking one.

Thankyou for the offer, i'll see what the other one looks like first when everything red is on there,

[oosh123]

Welshy,

What's your opinion if I were to modify the lazer into something like the kyosho KX-one? Incorporating the front gear box, upper deck, and the rear gear box together. What down fall do you see? I will design it so that it will fit your Team Orion 5000mAh 90C.

[Welshy40]

Its been done by a friendly chappie in Japan, however he did use the TC with one belt so your idea may be what is needed. You will still need a mass of alloy to keep the motor cool but will stop flex with the CF on both sides and would be almost indestructible.

But then again why not do both designs, the front gear box you have designed would look stunning, along with the finned motor plate and as your working on now the top deck mount with fan for the original look and this.

[Welshy40]

Alan,

Here is a picture I was on about, unfortunately I am awaiting my other emails to arrive but you can see the front 3mm spacing, also the centre poles have a 3mm spacer at the bottom and ive done the same on the rear mount and this makes the esc look small due to the height of the top deck plus also means no fan breackage as well as my 5500 90C orions fit like a dream ontop of my brass zeppin cell hole items and Rude Tony brass plate ontop of that. I hope this now makes sense.

[oosh123]

Originally Posted by Welshy40

Its been done by a friendly chappie in Japan, however he did use the TC with one belt so your idea may be what is needed. You will still need a mass of alloy to keep the motor cool but will stop flex with the CF on both sides and would be almost indestructible.

But then again why not do both designs, the front gear box you have designed would look stunning, along with the finned motor plate and as your working on now the top deck mount with fan for the original look and this.

For the front gear box, I am having trouble trying to find an affordable way to mount the lexan cover. Groove in the CF makes things too expensive.

[Welshy40]

Do the rear gearbox zxs option and use two screws on the side and two where the pivot wishbone block is.

[oosh123]

Originally Posted by Welshy40

Do the rear gearbox zxs option and use two screws on the side and two where the pivot wishbone block is.

There are too little room inside. It will have interference with the diff.

But just as I were driving back home from work, I thought of a very clever way to mount a thin sheet of aluminum on the gear box! muhahah! I am going to draft it up tomorrow. I will also anodize the thin sheet of aluminum blue as well. The more blue, the merrier.

[isobarik]

Then just put an piece of tape...


mvh isobarik

[oosh123]

Originally Posted by isobarik

Then just put an piece of tape...


mvh isobarik

Blue tape! It will be lighter, thus goes faster! Yeah! Another option to improve lap time.

[isobarik]

Originally Posted by rondoolaa

please dont ask me to get rid of my lazer stuff, its took ages to get this red stuff together,


i can give you the cash via paypal instantly if you want,

mohaaaa.mohaaaa.....

mvh Isobarik