New Durango DEX410V3

[Sabesto]

Really? Sure they are not steel?

[hloland]

They are made of steel on the old models... Try with a magnet.

[Marc0]

Originally Posted by Big G

Please no! Black or gunmetal. Yellow won't go with my red parts

I guess Tresrey will have some red hex

[mark christopher]

Originally Posted by coleman758

The shock stand off's on both my cars are alloy.
( the stand off is the part that mount the top of the shock to the shock tower)

Defiantly steel

[Big G]

Originally Posted by Marc0

I guess Tresrey will have some red hex

I hope so

[captainlip]

Originally Posted by Big G

I hope so

im getting more and more tempted by tresrey red parts set as ive a fair few tresrey bits already and a red shell and all the red tekin electrics

[coleman758]

Originally Posted by hloland

They are made of steel on the old models... Try with a magnet.

My bad i thought they where alloy,

Anyway my point was they are metal not plastic....

[Fozzy1989]

Finally got around to building mine today, mine is box standard unlike Andy's as this is my first. Only thing i didnt bother putting on at the moment are the roll bars.

[Andyp]

well done foz another one out the box.

i never fitted the roll bars either, i dont think i have ever used them on my 410.

got my elecs done today


By andypearson at 2011-09-25


By andypearson at 2011-09-25


By andypearson at 2011-09-25


By andypearson at 2011-09-25

[captainlip]

looks wicked, shorten that saddle link with some black cable.

can I ask if you need to run a power cap with the sr3500? or does it not glitch?

[Andyp]

Originally Posted by captainlip

looks wicked, shorten that saddle link with some black cable.

can I ask if you need to run a power cap with the sr3500? or does it not glitch?

Ha i know what you mean about the link wire but it is that length so i can get a good grab on it ! it is also white as i have a few 'jump' leads and it makes them easy to see in my pit box.

i guess you are talking about the rx ? it a ko rx never run a cap

[freddie]

got mine today build it this week !!

[The Chef]

Thought you'd have done that by now.

[jaffacake]

Are they the new durango hd rod ends or rpm hd ends?

[Andyp]

Originally Posted by jaffacake

Are they the new durango hd rod ends or rpm hd ends?

They are rpm ends on my car , HD's do come in the kit ,

[jkclifford]

Are the side pods wider, or just the photo angle?

[Fozzy1989]

Originally Posted by Andyp

well done foz another one out the box.

i never fitted the roll bars either, i dont think i have ever used them on my 410.

got my elecs done today


By andypearson at 2011-09-25


By andypearson at 2011-09-25


By andypearson at 2011-09-25


By andypearson at 2011-09-25

Cheers mate, electrics looking good. Gives me a few ideas for wiring for when i get my speedo. Also, just noticed you have the flex system fitted, u managed to give it a run if so what your thoughts on it?

[Andyp]

Originally Posted by Fozzy1989

just noticed you have the flex system fitted, u managed to give it a run if so what your thoughts on it?

I have run the flex system , I used it @ the f345s at Coventry , it was high grip astro ( when dry ! ) so prob not the best place to use it ! I don't usually race on astro so it would be hard to say if I noticed any diff !

[captainlip]

Originally Posted by Andyp

I have run the flex system , I used it @ the f345s at Coventry , it was high grip astro ( when dry ! ) so prob not the best place to use it ! I don't usually race on astro so it would be hard to say if I noticed any diff !

Same here, its just bling

[Bungleaio]

My v3 landed today unfortunately I snapped my 1.5mm driver yesterday when I was dismantling my v1

Everything looks great so far but I can see one place where some money has been saved, the manual. The original was the highest quality manual I've ever seen with a kit but the new one is on cheaper paper and is in black and white.

This is an observation not a moan though, I'm much happier with the extra cash going towards the 210 than shiny manuals