Ansmann buggy gallery

[4_cell_racer]

Are you willing to make some more of them lead weights Chris? If so how much?

[chris brown]

I got the shocks off ebay for £12. They looked good so I took a gamble.
I think they are 3 racing shocks. They are the first version and 3 racing now do version 2. They are available at rcmart in Hong Kong.
30wt front and 25wt rear.

[Tom3012]

My X2C



And the back up...

[Kusal]

Hi Tom,
Care to share s.Some details on the slipper of the car in the second picture?
Thanks

[Tom3012]

Originally Posted by Kusal

Hi Tom,
Care to share s.Some details on the slipper of the car in the second picture?
Thanks

Its a losi item, im not 100% sure but i have been told by others that it was a mod used back in the days of the xxx. Basically it helps to spread the load of the spring more evenly through the slipper plate giving a more consistant adjustment... So i believe anyway! Hope that helps!

If people would be interested i could look into get some made up...

[4_cell_racer]

Originally Posted by Tom3012

If people would be interested i could look into get some made up...

Id prob be interested in one or two of them if you had them made up......

[OneKiwi]

Q... do you find the cooling fins on the motor in the back up car help as I have heard that if it doesn't have a GREAT seal against the can it can trap heat instead of disperse it

[Tom3012]

I never noticed the motor getting too hot yet, must be doing something... I will however test with and without and get back to you with my results

[Cameo]

My TC02 at a recent event. I qualified very poorly in 9th made some changes before the final and climbed to 4th overall.

Dark blue white wheels. A little boring I know new paint coming soon

[Cameo]

This race was earlier in the year.
TC02 - T4 (with std shocks and plastic towers) TC02T

[racingdwarf]

got a madmonkey to have a play with, put B4 shocks on, B4 turn buckles,losi rear drive shafts so I can use same wheels as my 22, changed the front axles to B4 so I could use B4 front wheels, changed the screws, as the kit ones were a bit pants. Took it down to the track and was blown away by how good it is!!

[Tom3012]

So you used 22 cvds? Car looks good

[racingdwarf]

Originally Posted by Tom3012

So you used 22 cvds? Car looks good

yer, had a spair set,used losi bearings in the hubs, just have to shim the shaft on the inside of the hub to make sure you have enough in the drive cup on full droop (or it can come out) , then use assosiated rollpins and the original ansmann wheel addapter, reemed to fit the losi shaft. as i said I didn' think the original parts were sub standard, just want to limit the amount of wheels i need to have as 22 is my main car

[MikePimlott]

X4TE action shot (taken by Neil Oliver)

[Tom3012]

The new addition to the family...



Group hug...

[Addicted2blue]

I've just ordered my ansmann X2TE, i'm hoping it's a great car to drive on the indoor offroad carpet track that i always go to.
Does anybody know if there are other wheels that fit the ansmann X2TE?

[lordnikon]

My Monkey as it stands at the minute.

Original bodyshell stickered up. Quite afew blue cars when i first arrived. Monkey sticker covers up the hole i used for handout PT for a couple of weeks . Original wing is trashed after a couple of big crashes so this is the replacement from Eric @ concept


All the electrics and battery pack. New PTX PT in now too


My new shell i am just painting up at the moment. Still got the outer cover on so looks alittle dull

[Addicted2blue]

Those are schumacher big bore shocks, what oil are you using?

[lordnikon]

Originally Posted by Addicted2blue

Those are schumacher big bore shocks, what oil are you using?

They are indeed, 35 in the front and 30 in the rear

[Tom3012]

Curious as to why the shocks are on the front? How does that compare to standard?