|
#1
|
||||
|
||||
![]()
hi there,
I am selling my Durango DNX408 due to school commitments. i have owned this buggy since may when i bought it off a local race buddy. i have fully stripped it down and rebuilt the buggy and re oiled diffs and shocks to my setup. i recently fitted a new centre driveshaft to the centre rear and i recently fitted the exhaust manifold support to the car so the buggy is well maintained. i recently removed the front rubber dust boots because they had tears in them. the car has a number of mods fitted: 2mm mod, splash guard mod, throttle arm mod (longer bolts and nyloc nuts used so it doesn't come loss) and i also have the steering link bearing mod in spares. the buggy needs a new spur but other then that it is in good shape. the bodyshells are in good condition the white shell is in better condition then the red shell which has been used most of the time. original box is included and in good condition it is a shame to see it go great buggy handles like a dream but school commitments restrict me from using it. the car includes a number of spares: - bundle of air filters inner and outer foams - 12 degree castor blocks ( 14 degree blocks fitted) - 1 degree rear hubs - new plastic ends for all turnbuckles and a number of small other plastic parts - 1.3mm pistons (1.4mm pistons fitted) - 3 receiver packs - used pair of side guards - selection of shock springs - complete clutch set up 14 tooth and 13 tooth clutch bell with brand new springs fitted. - tank seals - manual, couple of setup sheets and sticker sheet any question or extra photos PM me ebay feedback if anyone is worried - http://feedback.ebay.co.uk/ws/eBayIS...ab=AllFeedback i am asking for £250 posted ![]() ![]() ![]() ![]() ![]() ![]() many thanks lewis
__________________
Durango DEX410R
Durango DESC410R losi 8ight 1.5 team got nitro driver www.gotnitroonline.com <----- check it out! |
Thread Tools | |
Display Modes | |
|
|