Tested this esc in 22?

[OneKiwi]

would this work well, thinking about the size of it as well.

Anyone tried it in a 2wd?
does it need the fan?

[smt]

XERUN Blue Brushless 120A ESC (1S Lipo Supported) AHKG is what you´re asking about?

You´ll need an ESC that supports at least 2S Lipos´s

Otherwise will hobbywing work...

[OneKiwi]

yep that one, it states that it runs on 2c lipo as well, just wondering if its better than the other HW that are 2cel specific

[colmo]

The Xerun 1s is 1s or 2s with a 2A/6V BEC, the v2.1 is 2s or 3s and has a lower V/higher A BEC. Apart from that, I believe they're identical - the 1s has the same heatsink included as the v2.1, just not mounted, afaik.

[JACKOR33]

Hi Onekiwi,
I run the std 2-3 cell 120a v2.1 in my losi with a 10.5 and no fan in mid motor config.You are paying extra against the std version for the 1s booster circuit for no reason other than if you wanted to use it in 1/12th or mardave racing on 1s?
Mine fits fine and performs great
I can email pics if you like...

cheers

dave

[OneKiwi]

Could you post them here in the show us your 22?
are they already there maybe, ill have a look as well

[wouter.z]

Somebody at my local club is running that esc in his22. But it barelly fits, its a big esc.

[JACKOR33]

Here is the speedo fitted sorry not best quality as taken from my phone and posted
I am running a low profile savox but a full size receiver aswell as the esc on the chassis no probs

[Steven Forster]

Originally Posted by JACKOR33

Here is the speedo fitted sorry not best quality as taken from my phone and posted
I am running a low profile savox but a full size receiver aswell as the esc on the chassis no probs

Sorry its a bit of topic but ive just got them IP5400mah batteries, have you had any problems with them, how do they perform ???

cheers

[JACKOR33]

Used them for the 1st time last nite, they performed great no swelling and they've been charged at 2c well 10amps with no issues well happy for the price

[OneKiwi]

still haven't gotten my 22 yet waiting for a reply from kirky2.
I would still like to have a stick pack mid motor and that small esc as I don't want to have to buy saddle if I can get away with it

Think that could work?

I might have to go low profile servo and or micro receiver.. or make custom battery holder that could accomodate RX + esc

[OneKiwi]

would the 60A hobbywing esc work fine to power the 22 with either a 6.5 or 7.5 motor??