Lazer zxr

[isobarik]

Welsh nice one there should be ok to run that....

mvh Isobarik

[rondoolaa]

does anyone know what size bearings are used in the slipper in the pic below???, as i have a couple of bearings missing...

[Ema]

Associated just released some new slipper pads designed for the Lazer Whelsy slipper .....
Thanks Associated !!!

http://www.redrc.net/2011/04/associa...-slipper-pads/

New slipper pads



Old slipper pads

[Ema]

Originally Posted by rondoolaa

does anyone know what size bearings are used in the slipper in the pic below???, as i have a couple of bearings missing...

I think that the standard bearings are fine, did you check the user manual ?
Otherwise we need more details .

Bye
Ema

[oli4ke]

Originally Posted by Ema

I think that the standard bearings are fine, did you check the user manual ?
Otherwise we need more details .

Bye
Ema

The big ones are 8x14 x4mm

[oli4ke]

Originally Posted by Ema

Associated just released some new slipper pads designed for the Lazer Whelsy slipper .....
Thanks Associated !!!

http://www.redrc.net/2011/04/associa...-slipper-pads/

New slipper pads



Old slipper pads

Those slipper pads work only with the standard ZX-R? not the ZX-RR right Ema.....

[Welshy40]

Originally Posted by oli4ke

Those slipper pads work only with the standard ZX-R? not the ZX-RR right Ema.....

Correct, if using a hyper clutch then the pads wont work. If using the zx slipper with the metal plates and my spur gear then it works really well and i tested that exact set up last night.

The zxr mk1 slipper should work with the newer designed slipper pads for the B4 and my spur so looks like my designing has finished.

The hyper clutch csn use my design spur gear as well but just cant use the slipper pads from the B4.

[oli4ke]

Originally Posted by Welshy40

Ron, when i am happy then it will be available from RW Racing. But needs proper testing in the zx and zxr slipper systems before that can happen. Yes the use of an associated slipper pad system is because i burn out the standard kyosho pads so are not up to the job and hope that my design works so zero burn outs happen.

James, Let me know when it's available at RW Racing!
Cheers mate!!!

[oli4ke]

Originally Posted by Welshy40

Correct, if using a hyper clutch then the pads wont work. If using the zx slipper with the metal plates and my spur gear then it works really well and i tested that exact set up last night.

The zxr mk1 slipper should work with the newer designed slipper pads for the B4 and my spur so looks like my designing has finished.

The hyper clutch csn use my design spur gear as well but just cant use the slipper pads from the B4.

You are a genius!

[rondoolaa]

Originally Posted by Welshy40

Correct, if using a hyper clutch then the pads wont work. If using the zx slipper with the metal plates and my spur gear then it works really well and i tested that exact set up last night.

The zxr mk1 slipper should work with the newer designed slipper pads for the B4 and my spur so looks like my designing has finished.

The hyper clutch csn use my design spur gear as well but just cant use the slipper pads from the B4.

excelent work welshy40,

cant wait for them to be made so i can ring neil and order the spur...

:-)

[Welshy40]

Originally Posted by oli4ke

You are a genius!

Cheers dude, another one to add to my zx/zxr design list.

[isobarik]

Was going to show you my dughters new carpet ride but couldnt upload the pics due to the server was down.

well you have to paint it by imagination.

Composite Craft chassi

Fiberlyte shock towers

Equalizer shocks

Technacraft turnbuckles old style with an hole in them.

ZXR Slipper with spring instead of washers.

Things to mount is

Blue steering, fiberlyte upperdeck and move over the electronics from the XLS.

I have ordered an ZXR body for it from bluegroove. I´ll guess that it will be not white and have an not broken wing since that was the compaints on the XLS.

mvh Isobarik

[isobarik]

Found the right composite craft sheet so will make an matching upper deck.

Otherwise look at this nice looking alu stuff in the front/rear

http://cgi.ebay.co.uk/Kyosho-Lazer-z...item19c50f63aa

mvh Isobarik

[isobarik]

For now my daughters NEW carpet racer look like this.



Feautering all the abow stuff and som 3000mah batteries just for show.
This could actually been run if it had some electronics.
Shall order som screws from rc screws they have an complete set for the zxr.

mvh Isobarik

[Ema]

Originally Posted by isobarik

For now my daughters NEW carpet racer look like this.

Feautering all the abow stuff and som 3000mah batteries just for show.
This could actually been run if it had some electronics.
Shall order som screws from rc screws they have an complete set for the zxr.

mvh Isobarik

Really nice !!!

Bye
Ema

[isobarik]

Originally Posted by Ema

Really nice !!!

Bye
Ema

thanks i had som complaints from her that the xls was not as good looking as she wanted it to be

http://proxy1.pixbox.se/arkivet/synl...32167670.jpg?0

the wing had some cracks and it looked funny due too fiberglass chassi and the 32 pitch gears makes some funny noises i think it look rather okay

Well this lazer has her aprovall (spelling) shall get some foams for it so it will be ready for the next years indoor running and some paint for the body when it gets here.


mvh Isobarik

[oli4ke]

Originally Posted by isobarik

For now my daughters NEW carpet racer look like this.



Feautering all the abow stuff and som 3000mah batteries just for show.
This could actually been run if it had some electronics.
Shall order som screws from rc screws they have an complete set for the zxr.

mvh Isobarik

Looks awesome Henrik!!!
FYI: The screwkit from RC screws is bad quality and incomplete ! As they say it's complete but actually some screws etc are NOT in the kit!

[isobarik]

oli have you bought the kit for the lazer zxr ????
What was missing.
mvh Isobarik

[rondoolaa]

Originally Posted by isobarik

For now my daughters NEW carpet racer look like this.



Feautering all the abow stuff and som 3000mah batteries just for show.
This could actually been run if it had some electronics.
Shall order som screws from rc screws they have an complete set for the zxr.

mvh Isobarik

nice car, where did you buy the carbon top deck if its not original and the carbon bit at the top of rear gearbox on opposite side to the slipper, above where the top shaft comes out

[isobarik]

Ron

The upperdeck and the brace are from fiberlyte.

http://www.fibre-lyte.co.uk/

mvh isobarik