22 - Ride height

[coleman758]

My 22 is all built up now!
but it seems to be really high up. I'm wondering if there is too much re-bound in the shocks? can anyone give me an idea of there ride height (Track ready)

[stegger]

Are all the electrics in it aswell as the lipo ?

[coleman758]

Originally Posted by stegger

Are all the electrics in it aswell as the lipo ?

Hey, Yes the car is ready to go. It just looks far too high.

[reg]

you need to build the shocks with no rebound

[jaydits]

is there some sort of trick to build the shocks
i found it hard to match them perfectly with no rebound
kind of liked the old type of shocks
thanks

[stegger]

Originally Posted by jaydits

is there some sort of trick to build the shocks
i found it hard to match them perfectly with no rebound
kind of liked the old type of shocks
thanks

For 0% rebound pull shaft out fully before putting cap on, if you want 50% rebound push shaft in halfway then put cap on etc etc.

[reg]

Originally Posted by stegger

For 0* rebound pull shaft out fully before putting cap on, if you want 50* rebound push shaft in halfway then put cap on etc etc.

doing it with the piston all the way out would be 100% rebound

[stegger]

Originally Posted by reg

doing it with the piston all the way out would be 100% rebound

Yes with the shaft pushed right in.

[coleman758]

I had the shaft all way out. Topped it up with oil. Put the diaphragm on then tightened it up.

If i put the shaft half way in, then top up then screw the cap on that should give me 50% rebound?

[reg]

Originally Posted by stegger

Yes with the shaft pushed right in.

that would be 0% rebound

[reg]

Originally Posted by coleman758

I had the shaft all way out. Topped it up with oil. Put the diaphragm on then tightened it up.

If i put the shaft half way in, then top up then screw the cap on that should give me 50% rebound?

if the shock is built with the piston all the way out that is 100% as when you push the piston in it will push itself out all the way,

if the shock is built with the piston all the way in that is 0% as when you push the piston in it will stay there,

i dont mind being corrected if im wrong

[coleman758]

Originally Posted by reg

if the shock is built with the piston all the way out that is 100% as when you push the piston in it will push itself out all the way,

if the shock is built with the piston all the way in that is 0% as when you push the piston in it will stay there,

i dont mind being corrected if im wrong

Thats what i was thinking?

[Wacker 2]

Originally Posted by reg

if the shock is built with the piston all the way out that is 100% as when you push the piston in it will push itself out all the way,

if the shock is built with the piston all the way in that is 0% as when you push the piston in it will stay there,

i dont mind being corrected if im wrong

I'm with you on that too... I built mine with the shaft pushed all the way in to acheive as close to 0% rebound as I could!

[shark]

Originally Posted by Wacker 2

I'm with you on that too... I built mine with the shaft pushed all the way in to acheive as close to 0% rebound as I could!

Yep

[coleman758]

Ok guys! done that! and its much better thanks!

[jaydits]

jep much better now
this weekend try to bet a feeling for them
thanks guys

[stegger]

Originally Posted by reg

that would be 0% rebound

correct, sorry mate can't multi task i was doing something else at the same time.

[reg]

Originally Posted by stegger

correct, sorry mate can't multi task i was doing something else at the same time.