Saturn 20t

[Dan13]

Hi
Any good for a 2wd buggy?
What gearing?
thanks
Dan

[mattJT]

Hi Dan

(just sent pm)

Are you planning on racing or bashing? and do you have a speed controller already?

I had a hobbywing 35a 9t brushless in my 2wd, 4wd and sct and found it to be plenty good (for the £50 price tag)

I'm only running a saturn 20t due to club rules.


Cheers
matt

[Dan13]

Originally Posted by mattJT

Hi Dan

(just sent pm)

Are you planning on racing or bashing? and do you have a speed controller already?

I had a hobbywing 35a 9t brushless in my 2wd, 4wd and sct and found it to be plenty good (for the £50 price tag)

I'm only running a saturn 20t due to club rules.


Cheers
matt

Im only bashing, my buggy is very light...very old aswell.
I run 8.4v and 17t to 19t pinions so they go very well.
I usely run ansmann motors, but wanted a change.
Dan

[mattJT]

I've also put a saturn 20t in my slash 2wd (moreso for my son to bash with)

Speed wise is ok, problem I would for see tho is the dirt getting into the can

[Dan13]

So, should be fine in my fighter buggy then,right?
I was thinking of a trx 19t 32dp pinion and a heatsink.
saturn 20t on 8.4v should move quite fast.
cheers

[mattJT]

Originally Posted by Dan13

So, should be fine in my fighter buggy then,right?
I was thinking of a trx 19t 32dp pinion and a heatsink.
saturn 20t on 8.4v should move quite fast.
cheers

If can power a sct, then yes, a buggy should be a ok, as for gearing, got the slash on a 23t, (would need to check the spur tho)