Lazer zxr

[isobarik]

Moth...thats the one ....cool .........

kalamark nope never bought one but i have also heard that they have changed the plastic for a better one.

mvh isobarik

[Ema]

Originally Posted by karlmark1

Hi guys,has anyone purchased any of the team bluegroove lazer zx/zxr bodyshells,as i've seen mixed reports on the quality of the lexan they use.
many thanks Mark

I got a team bluegroove Zx-r bodyshell and in my opinion the lexan is really thin and the details are quite poor compared to an original kyosho Zx-r one.
For sure it is not suitable for a runner, for a shelfer it's not the best body but it is better than no body at all .

Bye
Ema

[knmtrip3]

Originally Posted by Ema

I got a team bluegroove Zx-r bodyshell and in my opinion the lexan is really thin and the details are quite poor compared to an original kyosho Zx-r one.
For sure it is not suitable for a runner, for a shelfer it's not the best body but it is better than no body at all .

Bye
Ema

Thanks for that,think i'll give them a miss for now.
Mark

[Welshy40]

Look at kamtec, link is below and they do a zxs shell and now the sexy tomcat shell which is thicker than the original and takes a pounding. Better than the original.

[knmtrip3]

Originally Posted by Welshy40

Look at kamtec, link is below and they do a zxs shell and now the sexy tomcat shell which is thicker than the original and takes a pounding. Better than the original.

Has the tomcat bodyshell been released yet,just had a look at there website and couldn't see it??
Thanks Mark

[Welshy40]

Originally Posted by karlmark1

Has the tomcat bodyshell been released yet,just had a look at there website and couldn't see it??
Thanks Mark

Ive got the first few here and have given him the go ahead so I would advise calling him. Mention James advised you about it and he will know. Be warned tho that these shells never had the ZXR lines for the gear cover as it was used for various models including the tamiya proto so its a bit of time lining up to get right but worth it in the end.

[moth898]

with the undertray too I hope

[Welshy40]

Yes but you will need to cut a lot more off at the rear due to the way the shell is designed. A molds being made as i sent an undertray off to him to use. When i get my shell painted i will post pics of it attached to a zxr

[isobarik]

Welsh an ebay seller wont ship outside uk can i have the item shipped to you then you ship it to me ????

mvh isobarik

[Welshy40]

Yes mate i dont have a problem with that. I will pm you my address

[isobarik]

Welsh thanks ....

Moth are you also sending a personal note to me where you appologize the lost in the final in the Junior world hockey ????

mvh isobarik

ps ...its a joke ....hope you didnt get affended...btw moth do you have an PS3 ????

[moth898]

Offended....I'm too embaressed for the way they lost.

By the way, I ordered your shirt in a large, it wasn't in stock, they have to order it so its going to take a couple of weeks.

see ya

[isobarik]

Moth did you have an ps3 ????

mvh Isobarik

[moth898]

Hey iso, sorry I didn't see your last post but no I don't have a ps3....I'm not that into videogames.

Just to let you know, they got the jersey today and I orders the embroidering, I should get it back in a couple of weeks. Just one question:who's Dahlberg we tried looking it up in the NHL rosters but it wasn't there?

[isobarik]

Moth Youre speaking to him ....

mvh Isobarik

[adam lancia]

Henrik....?

[oli4ke]

Hi Guys,

After many months only reading on this forum, I decided to post something.
After many years of racing with my lazer zx, I decided to make a shelf queen from it.
I finally finished my restoration project, and I would like to share this with you guys.
Body and undertray is repro from team bluegroove and the wing is genuine same as the decals. Brand new genuine parts used and for 100% restored.

The result attached
Kind regards from Belgium

[Welshy40]

Guys im in need of an alloy rear top deck mount for the ZX or ZXR. Not fussed on what colour. If anyone has a finned heatsink as well then let me know.

[oli4ke]

Originally Posted by Welshy40

Guys im in need of an alloy rear top deck mount for the ZX or ZXR. Not fussed on what colour. If anyone has a finned heatsink as well then let me know.

Do you have a partnumber Welshy?

[kek23k]

Originally Posted by oli4ke

Hi Guys,

After many months only reading on this forum, I decided to post something.
After many years of racing with my lazer zx, I decided to make a shelf queen from it.
I finally finished my restoration project, and I would like to share this with you guys.
Body and undertray is repro from team bluegroove and the wing is genuine same as the decals. Brand new genuine parts used and for 100% restored.

The result attached
Kind regards from Belgium

Very nice box replica shelf queen. It looks factory fresh so I think you've done an excellent job on the restoration