Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 25-01-2011
Gareth Jones Gareth Jones is offline
Member
 
Join Date: Mar 2010
Posts: 271
Default Glitching.....

Hello,

I have a slight glitch with my electrics - once turned on the steering will every now and again twitch on its own. If i unplug the personal transponder it seems to stop however....

I have the below setup:

KO 40 mhz receiver
PT
LRP Sphere Competition Speedo
Sanwa 6v Digital Servo

I have tried plugging in a capacitor into the BAT slot on the receiver but then nothing works at all.

Can someone give me a nice simple solution?

Regards
Gareth
Reply With Quote
  #2  
Old 25-01-2011
PaulL PaulL is offline
Member
 
Join Date: Sep 2010
Posts: 12
Default

Where is your PT mounted?

I've had trouble before when i mounted mine on top of the servo (but only with certain servos) Or perhaps if it's too close to the receiver?
Reply With Quote
  #3  
Old 25-01-2011
ch!3f's Avatar
ch!3f ch!3f is offline
Mad Member
 
Join Date: Mar 2009
Location: barnsley
Posts: 1,208
Default

my brother had a similar problem at the weekend with his f1 car he had his electics all over the place so got him to tidy them up and away from the receiver wire and that solved it.he thought it was to do with his pt but just down to messy electrics.i always try keeping wires at least 1inch away from my receiver wire.
__________________
Reply With Quote
  #4  
Old 25-01-2011
Gareth Jones Gareth Jones is offline
Member
 
Join Date: Mar 2010
Posts: 271
Default

Quote:
Originally Posted by PaulL View Post
Where is your PT mounted?

I've had trouble before when i mounted mine on top of the servo (but only with certain servos) Or perhaps if it's too close to the receiver?
My PT is mounted on the servo which is also next to the receiver...

I did undo all the wires and made sure they were away from each other, but it made no difference.

I shall move the PT and see if that makes any difference.

Regards
Gareth
Reply With Quote
  #5  
Old 25-01-2011
migsy's Avatar
migsy migsy is offline
Senior Member
 
Join Date: Oct 2008
Location: Aberdare, south-wales
Posts: 764
Thumbs up glitch

if you run a pred, put the PT near the outer-side of the motor. you'll find your glitch should stop then.
__________________
EAT, SLEEP & RACE.

Keeping fast motors reving hard.

signed...migsy

racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. local club: Cwmaman RC Jammers.

www.the-pred.co.uk
RC BEARINGS 4 U.
Club 22 (admin)

Losi22, losi xxx cr
losi xx-4, losi xxx-4G
baja 5b 30.5cc.
Reply With Quote
  #6  
Old 26-01-2011
Gareth Jones Gareth Jones is offline
Member
 
Join Date: Mar 2010
Posts: 271
Default

and the prize for the correct answer goes to.......

Migsy!

Cheers for the advice, worked a treat moving the PT to rear end of the car. I put it on the battery strap in the end

Gareth
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com