HELP! WHATS NEEDED

[ashleyb4]

Ive stripped 4 screws on my front wheels so i wouldnt touch threadlock with them i use the AE thread lock i did use the tamiya stuff that actually came undone when you wanted it to.

A

[PaulRotheram]

use good quality wrenches and they wont strip..

i've never had a screw strip or come loose - threadlock or not.

[Gaz_Stanton]

Originally Posted by DCM

unless you ditch the button head screws for a caphead, for more leaverage to get them undone.

Not a standard/AE 4-40 cap head though as the diameter of the head is smaller that the ID of the bearing and so doesn't hold the wheel on.

[Richard Lowe]

No need for a plastic chassis if the car is set up properly...

Get yourself some blue front springs, silver rear, put 35w AE oil in the front and 30w in the rear and you're most of the way there