jammin x1cr with extras

[danny linforth]

Hi all
Here I have my x1cr PRO which has been maintained and cleaned after each run, it has been stripped cleaned and rebuilt oils checked etc, it has a lot of minor scratches underneath as normal. I am selling this with a 27mhz radio and my hong nor 2047 pipe which has seen better days but still does its job. It has 2 servos nothing special but work. The body shell is in ok condition a couple of cracks which have been patched with fibre glass. The car has got many spares and upgrades
upgrades:
CNC centre diff mount
alloy servo plate
pivot ball steering not fitted and needs a bit of tension to get it working well all stuff to do this is included
Spares:
There are loads of spares not all are listed but are still included
8x lower arms (front and back)
Spare wing (losi)
3x Pivot ball lower arms (2 in pack)
1x pack of pivot ball dust covers
Spare stone/side guards
Spare graphite plates (have not been upgraded to CNC)
2x knuckle arm carriers
Spare steering arms
Spare diff mounts centre
Spare splash guard
Front and rear chassis braces
Spare wing mount bits
2x spare exhaust protector
2x upper arm hinge pin holder
3x knuckle arms
Spare pivot bits (arms, hub carriers, etc)
2x rear hub carriers
3x toe plates have been upgraded to CNC
2x flywheels and 14t filtered clutch bell
Spare body post
Spare turn buckles and plastic bits (almost complete set)
Air filter
4x complete shocks!!
4x soft springs (yellow)
4x medium springs (red)
4x hard springs (blue)
2x spare shock bodies
5x shock caps
and little bits
I HAVE INCLUDED THE AIRFILTER AND CLUTCH BELLS IN THE LIST ABOVE.
I do have a clutch a little worn but better than nothing (not pictured)
The box of bits
In the box we have
Lots of screws all shapes and sizes
Lots of shims and washers
Lots of nuts
I also have little bits and bobs like shock stand offs, brake links, etc
There is also a lot of bearing (most wheel bearings)
Hinge pins
4x hexes and nuts
And that’s about it may have some more bits I find out but lots of stuff to keep you running the car only needs and engine to get it running the wheels I have included have plenty of life left, as you can see by the pictures I have fitted two fuel filters, one is for fuel the other acts as a cooler on the exhaust. I will also include a neatly laminated manual in a folder, it has setups etc. the car has a rechargeable receiver pack which is 2400 mah and lasts all day.

pics are here:











I am after £100.00 cash on collecton or £125.00 posted with paypal payment.
Thanks, danny