|
#1
|
||||
|
||||
![]()
Hi Guys,
Did any of you have to cut away some of the battery strap on the SC10 so you could use hard case 2S lipo packs? The strap goes over the area and blocks where you plug in the 4mm. plugs into the battery ![]() I had to chop away some of it so I could put the plugs into the lipo....
__________________
Losi Muggy-R (Spek, SH .28, 48T Spur, Steering mod, ACE) Losi 8Te (Castle MMM, 2200kv, Hyperion 6500mah 4s 35C Lipo, RC-M motor mount, Losi battery/radio tray) Maverick Atom XB 1/18 (Spek) Associated B4RS (Spek, Castle MM/5700KV, Lipo) Associated SC10 (Spek, Novak/8.5 Turnigy, Lipo) www.ddgraphics.co.uk |
#2
|
||||
|
||||
![]()
I've been at the battery strap on my truck with a dremel, basically so I can move the pack all the way back for a little more traction
![]() With the packs I am using (LRP 5300 40C) you can actually fit the connectors under the strap when soldered up side entry stylee and it all clamps down nicely. The FT carbon brace solves the problem, but I was told it is not available in the UK yet (from CML) a few weeks back, I am yet to bother ordering one from the states. |
#3
|
||||
|
||||
![]() Quote:
![]()
__________________
Gareth Stanton |
#4
|
||||
|
||||
![]()
I've drilled 2 holes in the wide front part of the original bat strap for the corally's to go through.. works a treat but lipo is now confined to that position! Does moving lipo back really help with traction or make the truck tail happy?(should i say happier!)
Dave
__________________
x factory x6 sq associated sc10 ![]() |
#5
|
||||
|
||||
![]() Quote:
![]() I should have thought to move the battery forward ![]() Good to hear the FT battery straps are available, I shall be investing in one of those shortly ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|