Lazer zxr

[lllyf]

Hi, If anybody can tell me where to find the front gear box to fix my broken one,thanks

[Welshy40]

Originally Posted by lllyf

Hi, If anybody can tell me where to find the front gear box to fix my broken one,thanks

Pm Dyna and ask him how much he can do one for your zxr.

[isobarik]

Originally Posted by Welshy40

Iso,

rear ujs need to be level and rear hub use the bottom middle hole on wishbone. Front wishbones level. Im finding that the zx and zxr setup doesnt work at all and this needs to be high to work well. Front and rear need to be the equal height off the ground with batts on board but do rekon a brass lipo tray is needed so hope to see mine sometime soon. Im using four degree front hubs and zero degee on the rear pivot pin plate.

thank welsh but i havent ordered the chassi yet shall do it later.
Any way i have sended fibre-lyte one of my alu motorplate to have it copied in carbon. When they can dulicate it in carbon I shall order it and the chassi/upperdeck.

On the steering posts do you use the ones to screw it together with the topdeck as per manual??? or do you use the optima version with the c-clip ???

mvh isobarik

[Welshy40]

Originally Posted by isobarik

thank welsh but i havent ordered the chassi yet shall do it later.
Any way i have sended fibre-lyte one of my alu motorplate to have it copied in carbon. When they can dulicate it in carbon I shall order it and the chassi/upperdeck.

On the steering posts do you use the ones to screw it together with the topdeck as per manual??? or do you use the optima version with the c-clip ???

mvh isobarik

For the zxr the poles with circlip but zxs as per manual as tension is needed on the belt unlike the zxr where the cars more efficient with a loose front belt.

[Welshy40]

Iso you can buy my one piece design lipo tray that fibre lyte made for me

[isobarik]

Welsh tested the um 510 wich is the uj for the rb5 62,5 so it fits but it has an longer axle so its better to just get the 62,5 bone and the axle for the lazer .

Also i found that black axle for the upper wishbone its actually an axle for ultima/optima serias of cars.
So
OT-11 and UM-7 also works since those bags contain that axle.


mvh isobarik

[Welshy40]

Originally Posted by isobarik

Welsh tested the um 510 wich is the uj for the rb5 62,5 so it fits but it has an longer axle so its better to just get the 62,5 bone and the axle for the lazer .

Also i found that black axle for the upper wishbone its actually an axle for ultima/optima serias of cars.
So
OT-11 and UM-7 also works since those bags contain that axle.


mvh isobarik

whats wrong with la128-4 as thats also still easily available

[isobarik]

Originally Posted by Welshy40

whats wrong with la128-4 as thats also still easily available

yeah but the parts numberot-11 um-7 i described was for that black axle for the upper wishbone .

La128-4 i found them at an korea company i emailed them but havent heard from them yet

I have ordered the LA219-4 from the LHS .

mvh Isobarik

[moth898]

I don't know what kamtec is doing but he's falling behind alittle, team bluegrove is selling complete bodies with the undertray for the lazer.

http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT

[knmtrip3]

I've recently purchased some used ballraced teamline hub carriers,but i need to replace the ballrace's,does anyone know what size's they are??

Mark.

[isobarik]

I think they are 4 inside and 8 on the outside but im not sure have to check ...

mvh Isobarik

[Welshy40]

Check this link out. You should be able to see some good pics of my car including two of it jumping (it had pink wheels on).

http://www.petitrc.com/prcrace2010/p...um2/index.html

[adam lancia]

moth: the bodies from bluegroove aren't made with the best quality lexan. I know a few guys that have picked up bodies from him and they've said the quality of the molds he uses are not so great. I would wait on Kamtec.

[moth898]

I want to buy from kamtec for that reason as well to compare, for now all I have is the bluegroove set and everyones word that kamtec is better.

[Welshy40]

Kamtec shells are better than the original in the case of kyosho as they are thicker and withstand more abuse. Im still using the same shell i fitted over two years ago and it still looks great.

[Ema]

Moth,
I have to quote the other guys ....
I bought a bluegroove Zx-r body (unfortunately before the undertray was available ) in order to check it better and I have to say that the Lexan is really too thin for a runner.

If your idea is to put the car on the shelf, the bluegroove body is fine (however some details are not as good as the original one), but if you want to race again your Lazer, it's better that you wait the Kamtec Zx-r shell or get a Kamtec Zx-s one ...

I also have to admit that the Parma Tomcat (that Welshy also sent to Keith) looks really sexy over the Zx-r ...

[moth898]

I've never seen the tomcat and agree its nice...so all that is left to say is KEITH DO YOUR THING!!!!

[Welshy40]

Originally Posted by moth898

I've never seen the tomcat and agree its nice...so all that is left to say is KEITH DO YOUR THING!!!!

Also you get a wing in the bodyshell mould so well worth the wait. I will keep chasing him.

Also you may be able to see my shell on the link ive attached

[isobarik]

You mean this ....

mvh Isobarik

[Welshy40]

I forgot about the pink wheels. Gutted and that was the only complete run i had with it. Still went well and the shell is still looking good considering its used every two weeks and is now coming onto three years old.