|
||
|
 |
|
||||||||||||||||||
|
#1
21-02-2010
|
||||
|
||||
motor and speedo compatability , for tc ..
hi
im in need of a 10.5t motor for my schumacher mi4 touring car , as at the moment im using a 13.5t novak ss motor , but im upagainst all 10.5t's  ..also at the moment i have a sp gt2.0 lpf esc fitted .. like this http://www.microtechracing.com//prod...997&Pcat=SPEED but in one of my other cars i have a nosram evolusion istc speedo ..like this http://www.microtechracing.com//prod...745&Pcat=SPEED but ive been told to fit the nosram istc speedo in my mi4 , but im not sure what motor will suit it , and im even more confused now ( it does'nt take much  ) as the speedpassion esc has adjustable timing and the nosram istc one does'nt .. so chances are im going to need a motor with adjusable timing on the endbell .. i know of a lrp x11 stockspec 10.5t , would that suit the nosram esc ... cheers for any help ,  im trying to do it on an as tight budget as i can ....
|
|
#2
21-02-2010
|
||||
|
||||
|
well, if the Speed Passion has adjustable timing, use that one, and use a motor that has it to, set the motor to 0' which gives you the grunt out of the corner, and then ramp the timing up on the ESC to give you the top end. I couldn't recomend a better motor than the Tekin Redline 10.5T.
Expect to use a lot more battery in one run though!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
|
#3
21-02-2010
|
||||
|
||||
|
I believe the latest firmware for the Speed Passion v2.0 has timing advance (adjusts timing on the fly to give better top end speed).
I'm not sure if that particular Nosram has timing advance.
__________________
 Photos: Oople Invernational 2010 - Sodden Sunday Muchmore N. Irish GP 2010 (Touring cars) BADMCC 1/8th Nitro buggies Current cars: X6^2 | JC BJ4WE | TM E4 & E4JS | HPI E-Firestorm | Losi Crawler | + many F1s, super crawlers, scalers, drifters in the works...
|
|
#4
21-02-2010
|
||||
|
||||
|
If you're on a budget why not try updating the Speedpassions software to the latest version with the variable timing. This is not the same as using a higher fixed timing or using higher timing on the motor.
You can then try your 13.5 and see how you go and then still get a 10.5 if you find it too slow. You will have to adjust your gearing if you use the variable timing on the speedo. Both of your speedos will be fine with whatever you choose to run but for 13.5 or 10.5 I'd go with the Speedpassion and the new sortware!
__________________
|
|
#6
20-03-2010
|
||||
|
||||
|
Quote:
im now using a lrp x11 10.5t motor and its either no top end or bottom end .. im thinking of changing motors now ... 
|
|
#7
20-03-2010
|
||||
|
||||
|
You need the Hobbywing/Speedpassion LCD programming box which you can find here for example --> http://cgi.ebay.co.uk/HOBBYWING-EZRU...item2557e1348a
The software is available for download on the speedpassion website and then it's just a case of following the instructions 
__________________
|
|
#8
20-03-2010
|
||||
|
||||
|
Quote:
 ... but thanks thou ...
|
|
#9
20-03-2010
|
||||
|
||||
|
ive just found one in the uk .... wey hey !!!
ive download the v1.31 and v1.32 downloads , is that correct also will it have on the fly timing with the new software loaded onto the esc , and i geuss its quite easy to work ... sorry for all the questions ...  ... cheers again ...
|
|
#10
20-03-2010
|
||||
|
||||
|
http://www.speedpassion.net/uploadfi...link_setup.zip
The interface software has all the different firmwares integrated. You are looking for the 107 or 110 firmwares to put onto your speedo. It does the on-the-fly timing advance. Any more help and I'll have to come round your house and do the update for you
__________________
|
|
#11
20-03-2010
|
||||
|
||||
|
Quote:
yeah thats the software i had downloaded , i just have to find the 107 - 110 firmware now ... cheers
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
