Lazer zxr

[Welshy40]

Yes I have both, but one set is longer than the other. If the other is a direct replacement and fits perfectly then dont waste your money on the other set as you will need to redrill the chassis to get it to fit.

[knmtrip3]

Originally Posted by Welshy40

The front hubs you already have do have two holes. Take the pin out of the wishbone and the hub will come out. You should notice another hole thats hidden when attached to the wishbone and thats the one to use with the longer driveshafts.

I've checked on the car plus my spare set,both only have 1 hole.Are they available from anywhere?
thanks,
karlmark1

[isobarik]

I can get the LA-59 for you if you want it dont ask much for it mohaaa....
.....just youre soul......

mvh Isobarik

[Welshy40]

Originally Posted by karlmark1

I've checked on the car plus my spare set,both only have 1 hole.Are they available from anywhere?
thanks,
karlmark1

Weird, sorry for that, I thought the ZX hubs I had on mine in 89 had two holes.

[Welshy40]

Anyone know where I can get UM121 from? UK has none so any links to the shops that have any? Cheers

[moth898]

FOUND THIS

http://cgi.ebay.com.au/Kyosho-UM121-...131310001r6849

[isobarik]

Fotball/soccer

Whels 0 - Swe 1

first just 1 medal in OG and now this, its hard to be an islander
shall do some phonecalls tomorrow and se how many there are...if i remember

mvh isobarik

no jersey yet .........

[moth898]

Patients is a virtue my friend, I actually already bought you something that you will look absolutly adorable in
I'm waiting for a friend to get back to me with the company that makes them, because at the store,s the prices for team canada jersey's magically tripled after the game. I'm in for a good laugh but not going to pay 200 dollars for a shirt.

[isobarik]

Holy crap...that wasnt cheap...

mvh Isobarik

[moth898]

Were can I find front and rear universals for my zxr racer. Also wanted to know what I can use for hex drive washers instead of the stock presure type

[BORMAC]

I have a pair of nip uni's which have the pin drive set up. They are still sealed in the packet. PM if interested.

[ducatikid]

Hi guys,

I know this isn't the sale section but noticed it's a thread for the Lazer ZXR so thought i would try here!

I have a Lazer ZXR that i would like to sell if anyone is interested?

http://pbckt.com/sB.du6

Kind regards

Lee

[lllyf]

Hi
where can I find LA32, mine was damage for a long time

[Welshy40]

Originally Posted by lllyf

Hi
where can I find LA32, mine was damage for a long time

LA32? refresh my memory, whats that?

[isobarik]

Welsh LA-32 its the front gearbox.

mvh Isobarik

[Welshy40]

Originally Posted by lllyf

Hi
where can I find LA32, mine was damage for a long time

Contact Dyna on this website. He can make them but may not be black, however he does a stronger version where the two shock towers screw mounts are linked at the top giving more duress.

[Ema]

Originally Posted by moth898

Were can I find front and rear universals for my zxr racer. Also wanted to know what I can use for hex drive washers instead of the stock presure type

You can use the new CVD designed for the Zx-5 .

The LA232 (or the cheaper 3 racing one) can be used insted of the W-5063 at the front and for the rear you can use the LA245.
The hex drive washer (cheap non alloy version) are the LA218.

Bye
Ema

[moth898]

Thanks Ema

[Ema]

Originally Posted by moth898

Thanks Ema

I'm not really sure about this, but probably you also need an LA231-02 at the rear because the LA245 has a different longer wheelshaft that did not fit correctly.

The alu hex drive are the LAW30 !

Bye
Ema
P.S. Don't forget to take some photos at your racer too !!

[moth898]

hey welshy, any news from kamtec on the zxr shell?