Shock piston

[KBRacing]

Hi
What shock piston can be used, beyond Ansmann stock piston to get the X-pro 2wd to jump over large jumps............

[Battle_axe]

Originally Posted by KBRacing

Hi
What shock piston can be used, beyond Ansmann stock piston to get the X-pro 2wd to jump over large jumps............

umm i dont know as i use the xprro pistons and the madrat pistons as they are different i would say tamiya ones should fit though

[kaylon]

Losi XXX-CR, Team Associate B4, Kyosho, Tamiya...basically most 1:10th shocks will fit, some better then others without adjustments.

Your looking for 75mm front and 95mm rears or close to that.

AE factory shocks are £40 per pair, Losi run about the same, Tamiya are £84 for a set of 4. All work out to be about £80 for a full set.

The X pro shock set is £52 for a full set and are really quite good, they do compare well with the others.

You could try changing springs... all 1:10th brands should fit an X Pro shock set 55mm fronts 75mm rears.

Also when trying for big air.. remember to control you're decent with throttle as you are in the air...try for as flat a landing as possible.

No matter what shocks or car you have if you plough the front end or slap the rear end into a hard surface it's gonna cripple you somehow eventually

J

[Battle_axe]

Originally Posted by kaylon

Losi XXX-CR, Team Associate B4, Kyosho, Tamiya...basically most 1:10th shocks will fit, some better then others without adjustments.

Your looking for 75mm front and 95mm rears or close to that.

AE factory shocks are £40 per pair, Losi run about the same, Tamiya are £84 for a set of 4. All work out to be about £80 for a full set.

The X pro shock set is £52 for a full set and are really quite good, they do compare well with the others.

You could try changing springs... all 1:10th brands should fit an X Pro shock set 55mm fronts 75mm rears.

Also when trying for big air.. remember to control you're decent with throttle as you are in the air...try for as flat a landing as possible.

No matter what shocks or car you have if you plough the front end or slap the rear end into a hard surface it's gonna cripple you somehow eventually

J

sorry kaylon he is talking about pistons he wants more pack so smaller holes/less holes

[kaylon]

Ahhh sorry... I just tend to buy kits ... it's not that I don't mind shopping around for bits and parts...but I tend to just buy full kits ...even if it's just a rod gone, I'd still prolly buy a full shock set... I know I know..waste of money heheh.

I'll get more 'spares' intelligent eventually

J

[Mabuchi_Johnson_Lee]

I am using TOP Racing Proton pistons