Long reach 5/64 or 2mm hex driver

[Big G]

Looking for a long hex driver to access motor screws on the B44 without all the farce of moving turn buckles and driveshafts out of the way.

any links?

[chris68nufc]

Try RS Components.

A mate of mine got his from there. You need a ball ended one to get in better

[sparrow.2]

Best way to do it would be to use 2.5mm head screws and fitting ball driver as the head is usually deeper and won't strip as easily as the 2mm headed screws.

[Big G]

sure that's an option. either 2mm or 2.5mm will work fine as I'll just change the screws to suit