|
|||||||||||||||
|
#1
|
|||
|
|||
|
hello i put a lrp sphere tc spec with a novak 10.5 in my sc10 i turned it on done 1 lap at pda and it stoped. look at it and the yellow wire come off the motor
so i soldered it back on and turned it all back on and it was just sat there the motor got realy hot and the yellow wire come off agen any1 help
|
|
#2
|
||||
|
||||
|
Check that there's nothing stopping the rotor from revolving in the motor and that there's no wires shorting across the motor terminals.
|
|
#3
|
|||
|
|||
|
thanks mate ill have a look at it. it has been runing ok up and down the road at home just done 1 lap on sunday and it did that with the wire
|
|
#4
|
||||
|
||||
|
When speedo's/motors get mega hot really quickly, that normally means something is binding or shorting out
|
|
#5
|
||||
|
||||
|
Also look at whether the rotor is still intact - i.e the magnets won't slide etc.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|