Go Back   oOple.com Forums > Car Talk > Tamiya

Reply
 
Thread Tools Display Modes
  #1  
Old 10-09-2009
purplenut's Avatar
purplenut purplenut is offline
Mad Member
 
Join Date: Jan 2009
Location: hereford
Posts: 1,147
Send a message via Skype™ to purplenut
Arrow Problems

This problem is with my trf501x,but its mostly electric.
Ok trans charged,batterys charged,all pluged in hold car off groung put on power goes like stink,altho some times just cuts out steering goes one way whole thing freezes for 3 seconds,But when on groung hardly no power at all and when power does kick in i loose radio contact and again stops for 4 seconds,realy doing m head in.
Electricts are as follows
speedo gtb 2.4 spectrum
futaba 2.4 trans
5.5 light motor
It worked fine few months back but had to strip it to put a new chassis on now this problem.
Hope some one can poss give some pointers.
Thanks.
Reply With Quote
  #2  
Old 10-09-2009
MRD's Avatar
MRD MRD is offline
Mad Member
 
Join Date: Feb 2008
Location: Cleckhuddersfax
Posts: 882
Default

Sounds like it could possibly be the 6v out on the speedo?. The spectrums cut out and go into failsafe for a few seconds when the power gets low such as during heavy acceleration. I had this problem with my TC so I banged a capacitor into the RX and it was fine. It could be that the 6v output is a bit dicky and is not giving the RX enough power even under normal driving so its constantly going into failsafe which would also explain loosing steering. Only way to test it is to try a different speedo or disconect the esc to radio power wires and try a 6v bat pack and see if it still does it.

Spectrums are also very bad if the aerial wire is broken. If its broken on the board the range can be reduced to a few feet. Ive had this happen before.

Other than that I'm out of ideas.
__________________
Mark Dyson

Clown
Reply With Quote
  #3  
Old 10-09-2009
purplenut's Avatar
purplenut purplenut is offline
Mad Member
 
Join Date: Jan 2009
Location: hereford
Posts: 1,147
Send a message via Skype™ to purplenut
Default

Ok thanks for that will try .
Reply With Quote
  #4  
Old 10-09-2009
purplenut's Avatar
purplenut purplenut is offline
Mad Member
 
Join Date: Jan 2009
Location: hereford
Posts: 1,147
Send a message via Skype™ to purplenut
Default

Hi ok tried rebinding no luck will test other ideas tom.
Keep um coming must get this sorted as racing tue night.
Leon
Reply With Quote
  #5  
Old 10-09-2009
CraigM's Avatar
CraigM CraigM is offline
Member
 
Join Date: Sep 2009
Posts: 38
Default

Similar thing happened to me when a wire dropped off my esc's capacitor

I've also heard it's not uncommon for gtbs and spektrums not to get along
Reply With Quote
  #6  
Old 11-09-2009
purplenut's Avatar
purplenut purplenut is offline
Mad Member
 
Join Date: Jan 2009
Location: hereford
Posts: 1,147
Send a message via Skype™ to purplenut
Default

Hi the thing is the gtb is thr 2.4 spectrum version and was fine before,god knows iam stumped will try my other gtb
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com