2wd Proto - CR2

[paul01ews]

Hi All,

Dave, i have been building mine too so it was good to find out where the small peice of c/f goes!

Check out the first piccy posted on this thread as you will need to take the gear box apart and drill some holes to mount the motor plate/ spindle on the other side..

Question for all out there... is there a front brass bulkhead for the cr like the trish bits B4 one?.. if not i will try and get some made up???

Paul.

[Belsten]

yes mate, both trish & ghea do one for the cr

[OldTimer]

The website is updated with build info for both the LHD & RHD versions

[GRIFF55]

Originally Posted by DaveG28

I have a load of lead at the ready!!! Are you using any in the nose or just under the cells?

20g inside the front bulkhead mate

[DaveG28]

Originally Posted by paul01ews

Hi All,

Dave, i have been building mine too so it was good to find out where the small peice of c/f goes!

Check out the first piccy posted on this thread as you will need to take the gear box apart and drill some holes to mount the motor plate/ spindle on the other side..

Question for all out there... is there a front brass bulkhead for the cr like the trish bits B4 one?.. if not i will try and get some made up???

Paul.

There's no gearbox mod needed for the lhd one as far as I'm aware, on that one you just mount the whole assembly backwards and reverse the esc??

[OldTimer]

Yep no mod's at all for the LHD version, only for the RHD with details of what to do HERE

[DaveG28]

Is there more than one page to the lhd build guide? It's says "goto page" at the bottom but my browser doesn't show it as "clickable"?

[OldTimer]

No just that one page, need to remove that bit at the bottom

[joelwhite]

So it looks like a rhd version is avalible now for us with non super cool speedos. Is that correct.

[bbq]

Danny need to know what set up you run on high bite astro
or is the owestry set up à good start for any track?

Only have 2 Times' to test the car befor the euros in spain
are you going there?
/Daniel

[rc_penguin]

Are the team all running low profile servo's? is there enough room to squeeze in a full size servo and the losi xcelorin speedo?, thanks in advance

[Southwell]

Originally Posted by rc_penguin

Are the team all running low profile servo's? is there enough room to squeeze in a full size servo and the losi xcelorin speedo?, thanks in advance

Im using a full sized servo.

[Danny McGee]

Originally Posted by bbq

Danny need to know what set up you run on high bite astro
or is the owestry set up à good start for any track?

Only have 2 Times' to test the car befor the euros in spain
are you going there?
/Daniel

Im running the set up that i thinks been posted already. Only change is, ive laid the rear shocks in on the tower. Simples!

[bbq]

sweet! but just so i dont get it wrong its the same one as on
AC web page?

And you didnt say if you were going to the Euros

[bbq]

First test today and it is fast. What strikes me is how much
more controled the car feels, and it is so much more controled
from apex to exit and you can attack harder and erlier.
I am thinking of puting on a front wing as i had some hard work
to level the car in the long jumps were you cary alot of speed

I used the set up from the AC sits with the only differans in
shock oil 37.5 front red piston #56, Green spring, Location
3-middle on the arm and tower. Unscrewed 2 turns for more droop

rear 30wt red piston no limiters and unscrewed 2 turns, pink
springs. Location 2- midle

used à GHEA brass bulkhead (40g)

What should make the car faster is when i get the GHEA
pistons in, as that just calms tha car down à bit more in the
bumpy sections. they are the chill pill.

Jonathan and all other guys involved.
Awsome job dude's

Track was my home track massive grip and all Astro many jumps more then in this picture

[johnboy]

When is the RHD version going to be released? Also will the car have its own shell or do you use the xxxcr shell?

[bbq]

I forgot to put in My set up report that i was running the RHD

[OldTimer]

Originally Posted by johnboy

When is the RHD version going to be released? Also will the car have its own shell or do you use the xxxcr shell?

I will hopefully have ready towards the end of next week a batch of LHD & RHD CR2 kits.

Part of the range of option parts does include a slim shell to be used with revised narrow side pods, also there will be XD front slim towers as well along with some other parts.

[Junior Z]

If you reverse two motor wire and if you change the position of sensor wire on the plug in a side of the cable.

You must be able to use all ESC like LRP and Speed passion ESC on the CR2 conversion kit LHD version? I'm wrong?

[Patryk Rybarczyk]

Hi, I am from Poland, i am driving xxxCR, and i am thinking about this carbon conversion. What is the difference about left motor side and right?

I dont know where i can buy it, I found it only here http://atomic-carbon.gforceimages.net/cr2/index.html but £145.00 is to much for me
Maybe somebody of U, have it used for sell?

Thanks.