xx4 and xxx cr gear ratio for brushless

[gazbaz2]

Hi all
Can any1 tell me if theres a site i can go on to get gear ratio's for the xx4 and xxx cr, or does any1 now what to run on a 88 spur using a 4.5 GTB in my xx4 .

Gaz

[_sleigh_]

Can you check that you're running an 88t spur in your XX4. What colour is it?? It's just that the chassis should be to close to run an 88t

Anyway.....

XX4 - LRP X11 5.5t - 84/16
XXX-CR - LRP 6.5t - 84/18

I'd say at the most on a 4.5t burshless in a XX4 - 84/15

[gazbaz2]

Hi Sleigh,
its new in the packet, its yellow but it say's on the lable that its a 88T, now i've done some investigating and yellow should be an 82T, its just that me spur has gone and the only 1 i have is an 88, dont no why i got it rather than the standard 1 i really dont no but anyway thanks for answering my post, i'll have to play around with it.
Cheers matey

Gaz

[_sleigh_]

You might find that it's yellow(ish) in colour, then it's a Kelvar spur. All sizes of Kelvar spurs are yellow(ish) in colour.

The non Kelvar are as follows (i think)

Purple - 84t
Yellow - 82t
White - 78t