|
||
|
 |
|
||||||||||||||||||
|
#1
26-04-2009
|
||||
|
||||
Wanted - B4 rear anti roll bar
Anyone got one lying around they don't want?
 G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing 
|
|
#2
26-04-2009
|
||||
|
||||
|
b4 roll bars i've found are abit short for an x6 g
if that's what it's for
|
|
#3
27-04-2009
|
||||
|
||||
|
So what do we use Tiiiiimmmmmmeeeeeehhhhhh?
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
|
#4
27-04-2009
|
||||
|
||||
|
bit of coat hanger lol
__________________
|
|
#5
27-04-2009
|
||||
|
||||
|
the bits of a b4 one but the roll bar is piano wire 1.2mm
|
|
#6
27-04-2009
|
||||
|
||||
|
saying that if you do this
HPIM1973.jpg and fit behind the shock tower and put the ball stud on the inside of the wishbone which is a right pain to do, it'll probably fit are b44 ones longer
|
|
#7
27-04-2009
|
||||
|
||||
|
So who's got a bit of 1.2mm piano wire to trade?
 G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
|
#8
27-04-2009
|
||||
|
||||
|
Or a B4 kit as I'm willing to do the bulkhead mod
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
|
#9
27-04-2009
|
||||
|
||||
|
Is that the bulkhead mod that rich lowe does so he can use b44 wishbones?
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
