Lipo Balancing, help please!

[pro4nut]

Ok, i am still very new to this lipo malarky. So some help and opinion would be very nice kind oople people.

Firstly i have a couple of LRP 7.4v 1800mah lipo packs which i am currently using a lipo safe charger with.
However they have these funky looking balance leads which i would like to use to get the longest working life out of the cells and keep them in good order.

So without buying a new charger can i get an inline balancer?
Or can i get a lead compatible with the trakpower v balancer for my cells? so i can just by a v balancer and a lead.

Oh and these are micro packs if that isn't clear, thankyou

[Tim Ward]

I use a TP in-line balancer with my 1/18th packs.

TP do a lead that should match, provided you use Deans power connectors. This means no cutting/soldering at all!

Park Number : TPHR3S-VBALHD

Link : Click here and follow link to 'Leads and Accessories, then click on the leads section, it the last product at the bottom of the page

HTH

[JCJC]

I am sure its just a case of adding a balancer to your charger Wayne, problems pop up with the many types of balance plug on your battery, I have found this the difficult part to match, remember you do not have to balance all that often. Mick

[jim76]

if you can get the relevant board for the BC6 Wayne you know you can balance on mine every now and then. As said, they only need balancing once in a while, unlike NiMH