Go Back   oOple.com Forums > Trade Room > Wanted

Reply
 
Thread Tools Display Modes
  #1  
Old 06-12-2008
dr durga dr durga is offline
Member
 
Join Date: Dec 2007
Posts: 119
Default battery charger

hi guys does anyone have a new or secondhand carger which can also charge lipo? 60 pound max
Reply With Quote
  #2  
Old 06-12-2008
footey footey is offline
oOple Tattoo Dancer!
 
Join Date: Jun 2006
Posts: 1,605
Default

hi m8 ring mb models as mike sells chargers that will do both lipo and normal cells for less than that number in my sig
Reply With Quote
  #3  
Old 06-12-2008
dr durga dr durga is offline
Member
 
Join Date: Dec 2007
Posts: 119
Default

hmm ok ill do tht tomoro... just found this i is ok? http://www.modelshopleeds.co.uk/cata...93bf01d0af9dfa
Reply With Quote
  #4  
Old 06-12-2008
i4n's Avatar
i4n i4n is offline
Senior Member
 
Join Date: Jan 2008
Location: Deal, Kent
Posts: 708
Default

I (and a few others I know) use one of these:

http://www.actionmodelcentre.co.uk/p...od=JPD-4402900

I've used it with both Ni-Mh and LiPo and it is one of the best chargers I have used, I prefer to use it over my Much More CTX charger which cost about 3 times as much!

You'll need a power supply with it too if you haven't already got one - the one I use is http://www.modelsport.co.uk/?CallFun...n&ItemID=23410 but there are loads of others out there, just make sure it is powerful enough (better to pay a bit more now for a quality product then get a cheap one and have to buy the quality product in a few months time - I learnt this the hard way ). If you want to get both from the same place this charger is also good http://www.modelsport.co.uk/?CallFun...n&ItemID=29476, I've seen a Schumacher sponsored driver using it.

Ian
__________________
Dragon Paints
Reply With Quote
  #5  
Old 06-12-2008
bmx833's Avatar
bmx833 bmx833 is offline
Member
 
Join Date: May 2008
Location: market rasen, lincolnshire
Posts: 149
Default

if i would you i would get the imax b5 from modelsport, 62.29? ithink posted it was.
charges and balances all my batteries and never had any problems with it, great charger for the price
also i had that xbase before but it couldn't balanceand everyonce in a while it would false peak
just my 2cence

Brad
Reply With Quote
  #6  
Old 06-12-2008
dr durga dr durga is offline
Member
 
Join Date: Dec 2007
Posts: 119
Default

Quote:
Originally Posted by i4n View Post
I (and a few others I know) use one of these:

http://www.actionmodelcentre.co.uk/p...od=JPD-4402900

I've used it with both Ni-Mh and LiPo and it is one of the best chargers I have used, I prefer to use it over my Much More CTX charger which cost about 3 times as much!

You'll need a power supply with it too if you haven't already got one - the one I use is http://www.modelsport.co.uk/?CallFun...n&ItemID=23410 but there are loads of others out there, just make sure it is powerful enough (better to pay a bit more now for a quality product then get a cheap one and have to buy the quality product in a few months time - I learnt this the hard way ). If you want to get both from the same place this charger is also good http://www.modelsport.co.uk/?CallFun...n&ItemID=29476, I've seen a Schumacher sponsored driver using it.

Ian
why do i need a power supply?
Reply With Quote
  #7  
Old 06-12-2008
mark christopher's Avatar
mark christopher mark christopher is offline
Spends too long on oOple ...
 
Join Date: Jan 2007
Location: haxey, doncaster
Posts: 7,787
Send a message via MSN to mark christopher
Default

i have one for £20 plus postage

Simprop Intelli-Control V3 Charger
All Helis


The Inteli Control V3 goes beyond your normal Charger with lots of extra sophisticated programming. Gives fully automatic charging of NiCads and easily adjusted manually set charging of NiMH Lithium and Lead Acid batteries. Even comes with a built in cooling fan so you may charge continuously without over heating. The manual setting only requires you to set: Battery type (Nicad NiMH etc) Number of Cells Capacity Charging Current. You can also set discharge current for NiCad and NiMH to cycle the batteries and cycling can be set to be done from 1 to 99 times automatically. Pleasantly clear instructions are included. Very advanced controls.
195.00
PART#SI1036


__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
Reply With Quote
  #8  
Old 06-12-2008
dr durga dr durga is offline
Member
 
Join Date: Dec 2007
Posts: 119
Default

ill be able to buy it near christmas day... my mums buying for christmas... keep though... but someone has to awnser my power supply question first
Reply With Quote
  #9  
Old 06-12-2008
i4n's Avatar
i4n i4n is offline
Senior Member
 
Join Date: Jan 2008
Location: Deal, Kent
Posts: 708
Default

Quote:
Originally Posted by dr durga View Post
why do i need a power supply?
Because they are both 12V chargers. You could use a good 12V battery (such as a leisure battery) but for ease of transport if you race inside a lot a power supply is your best bet.

The majority of the "competition" spec chargers are 12V. The ones aimed at the backyard basher etc, are the one's that are 240V.
__________________
Dragon Paints
Reply With Quote
  #10  
Old 06-12-2008
Col's Avatar
Col Col is offline
Awesome Admin
 
Join Date: Mar 2006
Location: York
Posts: 4,571
Send a message via AIM to Col
Default

because all decent chargers run off 12volt supply, not 240volt house supply. You need the power supply to reduce the voltage to the required amount.
A supply is not needed if you've got a superb car battery or a lesure battery to run from instead.

EDIT beaten too it...
Reply With Quote
  #11  
Old 06-12-2008
i4n's Avatar
i4n i4n is offline
Senior Member
 
Join Date: Jan 2008
Location: Deal, Kent
Posts: 708
Default

........sorry Col!
__________________
Dragon Paints
Reply With Quote
  #12  
Old 06-12-2008
JCJC's Avatar
JCJC JCJC is offline
Mad Member
 
Join Date: Nov 2005
Location: Oxon
Posts: 1,662
Default

Quote:
Originally Posted by dr durga View Post
ill be able to buy it near christmas day... my mums buying for christmas... keep though... but someone has to awnser my power supply question first
Because most of the time you are in a field and a car or leisure battery is your only power, generators are being used more, if you have 240 volts then a power supply will allow you to use your 12volt charger. I use a BC6 which is 12 & 240volt, but close to £100 new.

Get down to a club and see whats what, ask questions and see what people are using and why.
Reply With Quote
  #13  
Old 06-12-2008
jim76 jim76 is offline
*SuPeRsTaR mEmBeR*
 
Join Date: May 2006
Location: ruislip
Posts: 2,890
Default

the Bantam BC6 is the best alrounder out there. Does NiMH cells and Lipo (balancing). Runs from 12v or 240v.
It is around £100 as JC said, but if you can find a second hand one it would be well worth getting. It would cover you for most cells for years.

have a look on ebay maybe
__________________
4wd - X4TE
2wd - X2C (Mad Rat passed down to son!)

Ansmann Racing UK


RIP - MicroTech Racing

Trader Feedback
Reply With Quote
  #14  
Old 07-12-2008
dr durga dr durga is offline
Member
 
Join Date: Dec 2007
Posts: 119
Default

Quote:
Originally Posted by jim76 View Post
the Bantam BC6 is the best alrounder out there. Does NiMH cells and Lipo (balancing). Runs from 12v or 240v.
It is around £100 as JC said, but if you can find a second hand one it would be well worth getting. It would cover you for most cells for years.

have a look on ebay maybe
none on ebay... 1 with a reserve but you know... oh well i think i might go with the imax b5 from modelsport unless mark christopher pmes me a pic of his...i need to see the condition thanks guys you have really helped
Reply With Quote
  #15  
Old 07-12-2008
mark christopher's Avatar
mark christopher mark christopher is offline
Spends too long on oOple ...
 
Join Date: Jan 2007
Location: haxey, doncaster
Posts: 7,787
Send a message via MSN to mark christopher
Default

its as new and is the same as the pictures, it has original box and instructions
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
Reply With Quote
  #16  
Old 07-12-2008
JCJC's Avatar
JCJC JCJC is offline
Mad Member
 
Join Date: Nov 2005
Location: Oxon
Posts: 1,662
Default

Looks a good buy to me, & Mark knows his stuff, if Frogger still has one of these you are set up, http://www.oople.com/forums/showthre...172#post183172

why ain't you out at the track looking round
Reply With Quote
  #17  
Old 07-12-2008
dr durga dr durga is offline
Member
 
Join Date: Dec 2007
Posts: 119
Default

Quote:
Originally Posted by mark christopher View Post
its as new and is the same as the pictures, it has original box and instructions
could you sorta keep that untill near christmas... ?? cause i will def be able to buy... and ill be able to get the battery
Reply With Quote
  #18  
Old 07-12-2008
mark christopher's Avatar
mark christopher mark christopher is offline
Spends too long on oOple ...
 
Join Date: Jan 2007
Location: haxey, doncaster
Posts: 7,787
Send a message via MSN to mark christopher
Default

if its sold else where it goes, xmass is 2 weeks away, much longer and you will miss the xmass post anyway
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com