Aluminium Parts

[MikePimlott]

X6 4 Deg rear hinge pin brace ?? just a thought.

[Chris Doughty]

just knock out a whole new car Danny...

[mark christopher]

danny you up for designing a light weight fly wheel for my ic car?

[bbq]

Danny!

2 things is on my wish list
Steel or brass front pivot block for the CR, the ones i have has bin around for to long =)
And i want a Brass plate that will fitt in to the bottom of the batery tray so i still
can run the sub-c weight with lipo packs. i think this will lower CG

[Danny McGee]

Originally Posted by Lee

Can you do me one of these

Attachment 4312

Piece of pi$$ ... Do you want it from solid or can it be a weldment!

As for the car Chris, yer im getting there slowly

[Danny McGee]

Originally Posted by mark christopher

danny you up for designing a light weight fly wheel for my ic car?

Yer thats no prob. PM and we'll talk about it more

[Danny McGee]

Originally Posted by bbq

Danny!

2 things is on my wish list
Steel or brass front pivot block for the CR, the ones i have has bin around for to long =)
And i want a Brass plate that will fitt in to the bottom of the batery tray so i still
can run the sub-c weight with lipo packs. i think this will lower CG

Do you mean a brass or steel front bulkhead?

and regarding the tray! do you want the rear pivot plate to be steel or just something that would slot in?

[Danny McGee]

Originally Posted by bigred5765

i still have the solid works drawings i did, if you want them just ask, im sure you can perfect them mate,

Send me what you have Carl and ill knock something up and see if we can get it done what material did you want it from?

[Fabs]

can you make me some rear suspension holders for the rb for sunday?

[Danny McGee]

Originally Posted by Fabs

can you make me some rear suspension holders for the rb for sunday?

That would be a no mr F, im heading home now ive done my 40 hours this week :P

[bigred5765]

Originally Posted by Danny McGee

Send me what you have Carl and ill knock something up and see if we can get it done what material did you want it from?

its to big to post as a attachment pm ue your email

[bbq]

Originally Posted by Danny McGee

Do you mean a brass or steel front bulkhead?

and regarding the tray! do you want the rear pivot plate to be steel or just something that would slot in?

This is a pivot block?

What is heviest brass or steel?

what i hade in mind is a thin plate to put under the lipo pack to still have the
Weight of a 6 cell pack. if i put in a lipo today i will change the CG due to
the lipo almost is 120g lighter then 6 sub-c.

So a plate that is thin and fits in the bottom of the tray to get a beter CG with lipos

somthing like this but for the CR
http://www.redrc.net/2008/10/manutec...battery-plate/


I hope you understand =)

[Fabs]

Originally Posted by Danny McGee

Piece of pi$$ ... Do you want it from solid or can it be a weldment!

As for the car Chris, yer im getting there slowly

You lazy twit i'm going to work tomorrow to make them anyway

[Danny McGee]

Im pretty sure that brass is heavier. Thats what i run on my 2wd and it seems to help me.

I've actually got that modeled up already so that will be handy (somthing i dod for uni)

Will look into it over the weekend

[Danny McGee]

Crazy fool...

[b4rs]

hi danny, what do u make em on? and how do u anodize them? could you make front and rear purple bulheads for the durga?

[jimmy]

leave your durga alone, it's already good enough.

[mark christopher]

Originally Posted by bbq

This is a pivot block?

What is heviest brass or steel?

what i hade in mind is a thin plate to put under the lipo pack to still have the
Weight of a 6 cell pack. if i put in a lipo today i will change the CG due to
the lipo almost is 120g lighter then 6 sub-c.

So a plate that is thin and fits in the bottom of the tray to get a beter CG with lipos

somthing like this but for the CR
http://www.redrc.net/2008/10/manutec...battery-plate/


I hope you understand =)

use a strip off roofers lead cut to stick pack size

[b4rs]

lol jimmy, for you £250? yes. teery tibbs talk to me.

[Danny McGee]

Originally Posted by b4rs

hi danny, what do u make em on? and how do u anodize them? could you make front and rear purple bulheads for the durga?

They'de be made on a 6 axis milling machine that we have at work, and id also be using the small anodizer we have too. We only use it for our prototype bits that we have to make so its not being used all the time.