show me your x6 / x5's

[level-4]

Originally Posted by Snakesonaplayne6

Are you from Michigan? Because I saw this car on the 2wdrc.com drivers page.

i am

[walla]

heres mine

[bigred5765]

hey adam you been tango,ed, we wont miss that one lol

[stegger]

Finally got my X-6 finished Thanks again to Blitzboy for doing the paint Camphone doesn't really do the paint justice.

[vinny20]

WOW....that looks cool steg

[Lee]

Originally Posted by stegger

Finally got my X-6 finished Thanks again to Blitzboy for doing the paint Camphone doesn't really do the paint justice.

Do you think you will ever run it?

[bigred5765]

lookin good

[DAVIDZX5]

Heres mine

IMG_2405.jpg

[Tom3012]

heres mine...

[Wraggy]

all done and ready to roll .
couldnt be bothered to put clean wheels on sorry ..
and thanks to Blitz for theawesome shell so quick

[GRIFF55]

nice one there mate, looking goooood!!

[super__dan]

@ Tom and Paul

The car is much better balanced in the air with the rear wing mounted as far forward as possible (and little/no guerney), which means you need to trim a section out of the front of the wing. Like;

http://www.oople.com/rc/photos/south.../NO5E1237.html

Up to you like but if it jumps nose high move the wing forward and cut the back out, same with understeer into a corner at the end of a straight (Worksop for example).

[Tom3012]

Originally Posted by super__dan

@ Tom and Paul

The car is much better balanced in the air with the rear wing mounted as far forward as possible (and little/no guerney), which means you need to trim a section out of the front of the wing. Like;

http://www.oople.com/rc/photos/south.../NO5E1237.html

Up to you like but if it jumps nose high move the wing forward and cut the back out, same with understeer into a corner at the end of a straight (Worksop for example).

Ive moved mine foward since the picture, that was just as soon as it was all done, when it was shiney and new!

[Mike Hudson]

Heres my spaceship Excuse the crazy wetweather tyres from NE regionals!

[stegger]

Looks fantastic that Mr Hudson

[bigred5765]

I like that one,

[MHeadling]

nice. x6 there! What make are your front C hubs? K factory or gpm? Are they worth having? If never broke one on my b4 before

[Mike Hudson]

Thanks I try my best the front castor block hubs are fastrax, not essential I think i broke only a couple of these and the steering blocks sometimes at the same time on the B4 and same with the X6 but i just got sick of them breaking, got these so only the steering hubs will break which is once every year normaly when they have got old and decrepid wouldn't get both castor block and steering block hubs though as this will put more stess on the wishbone which is worse, touch wood...havn't broken a front wishbone since last year either

[blitzboy]

Originally Posted by Wraggy

all done and ready to roll .
couldnt be bothered to put clean wheels on sorry ..
and thanks to Blitz for theawesome shell so quick

i ve seen that shell before

[minimini]

here is my X6 shell ..........with Satoshi Maezumi's pattern.......the car is still under construction.........