CAT SX is here!

[Lee]

wont losi fit?

[stegger]

Originally Posted by Lee

wont losi fit?

Possibly lee but i have none yet and i don't know the rates

[Lee]

I have loads, if you need some ask me

[Oliv996]

Could be helpful for those who have AE, TL and old and new Schumacher springs:

[Richard Lowe]

Originally Posted by stegger

If the AE shock springs fit then you could use blue rears and black fronts couldn't yeh ???

If you wanted the front really soft and the back really stiff yeah

[Jean-Christophe]

Hi there...can anybody answer my questions :

- which shock pistons are included in the SX kit?
- which plastic pinions to adjust the ratio?
- which springs?

Thanks a lot
Jean-Christophe

[stegger]

Originally Posted by Richard Lowe

If you wanted the front really soft and the back really stiff yeah

Isn't it the other way around rich

[jimmy]

uhmm, no?
Black is very soft - blues are some of the hardest springs. a crazy mans mixup of springs on any car!

you try the usual blue or silver front, with silver or green rear.

[Kecky]

Kit standard parts are:

2 Hole Shock Pistons
33t Plastic Pinion
Yellow Springs front & rear



"Hi there...can anybody answer my questions :

- which shock pistons are included in the SX kit?
- which plastic pinions to adjust the ratio?
- which springs?

Thanks a lot
Jean-Christophe"

[stegger]

Originally Posted by jimmy

uhmm, no?
Black is very soft - blues are some of the hardest springs. a crazy mans mixup of springs on any car!

you try the usual blue or silver front, with silver or green rear.

I thought blue rears were 2.55rate and blacks fronts were 3.20 rate as per the chart above jim

[Lee]

I think we have a mix up of brands

[stegger]

Originally Posted by Kecky

Kit standard parts are:

2 Hole Shock Pistons
33t Plastic Pinion
Yellow Springs front & rear



"Hi there...can anybody answer my questions :

- which shock pistons are included in the SX kit?
- which plastic pinions to adjust the ratio?
- which springs?

Thanks a lot
Jean-Christophe"

Ryan my kit had 2 hole pistons for the rear and 3 hole for the fronts

[jimmy]

I thought we were talking about AE springs here? if not, then ignore what I said.

[stegger]

Originally Posted by jimmy

I thought we were talking about AE springs here? if not, then ignore what I said.

Yes AE springs

[Chrislong]

Originally Posted by Richard Lowe

If you wanted the front really soft and the back really stiff yeah

I can see the logic, as the AE blacks on paper are stiffer than Schumacher new yellows. Although it sounds a country mile out.

Lee, can I borrow a pair of silver & orange front springs and Losi cups - I have a sneaky suspicion you have some....

[Lee]

Correct

Well done steve

[Northy]

You tend to run much softer on the rear. Trust us, Silver/Blue fronts, Silver/Green rears if AE.

G

[Kecky]

Honest

I'm sure mine were 2 hole for both ends.....i'll check later as i'm stripping them when i get home anyway, to cut off the top of the diaphragm

Originally Posted by stegger

Ryan my kit had 2 hole pistons for the rear and 3 hole for the fronts

[stegger]

Originally Posted by Northy

You tend to run much softer on the rear. Trust us, Silver/Blue fronts, Silver/Green rears if AE.

G

Jimmy/graham i'm not questioning what your saying i'm just going off the rates and coloured springs that AE give Surpose you can't go against experience.

[Lee]

So what your saying is that northy has a soft rear from experience?