TrackPower LIPO Fit

[mark christopher]

Originally Posted by Tom3012

3200 saddles dont fit the pred

in what way?

[mark christopher]

501 http://www.oople.com/forums/showthre...ht=lipo+saddle

saddle 4800 in a b4 http://www.oople.com/forums/showthre...ht=lipo+saddle

saddle 3200 in a D4 http://www.oople.com/forums/showthread.php?t=10879

all i can find for now

[Tom3012]

the battery posts need moving back about 5mm... one of the other team drivers has them and needed to do a small out of modification to allow them to fit

[bjcaldwe]

Thanks for the info.

[Chrislong]

Originally Posted by Tom3012

the battery posts need moving back about 5mm... one of the other team drivers has them and needed to do a small out of modification to allow them to fit

There are not many cars which these are a direct fit into, aslong as the gap is enough then bracing can be made/adjusted to suit. If you want to try any of my packs for size then just say - will happily see if they fit with you Tom

[mark christopher]

Originally Posted by Tom3012

3200 saddles dont fit the pred

Originally Posted by Tom3012

the battery posts need moving back about 5mm... one of the other team drivers has them and needed to do a small out of modification to allow them to fit

confused dot com!! so they dont fit or they do fit with a modification?
which one?

[DaveG28]

Originally Posted by mark christopher

501 http://www.oople.com/forums/showthre...ht=lipo+saddle

saddle 4800 in a b4 http://www.oople.com/forums/showthre...ht=lipo+saddle

saddle 3200 in a D4 http://www.oople.com/forums/showthread.php?t=10879

all i can find for now

Thanks Mark!

[DaveG28]

SOrry if this is posted elsewhere, but are the 3200's the same length/width as the 4800 saddles, but lower?

If so looks like it'll be real easy to get them in the 501!

[Cockerill]

www.trakpower.com - tells you everything you need to know

[mark christopher]

Originally Posted by DaveG28

SOrry if this is posted elsewhere, but are the 3200's the same length/width as the 4800 saddles, but lower?

If so looks like it'll be real easy to get them in the 501!

yes exactly the same foot print but lower

[gargadud]

Hi Guys,

I am considering to purchase this TrackPower 4800 saddle packs.

Just wondering if it has a balancer port or if you have to load each cell individually (hope it's not a silly question )

Thanks

[Tom3012]

Originally Posted by mark christopher

confused dot com!! so they dont fit or they do fit with a modification?
which one?

its simple, they dont fit as is, you have to make some modifications. Hope that's clear?

Tom

[Tom3012]

Originally Posted by Chrislong

There are not many cars which these are a direct fit into, aslong as the gap is enough then bracing can be made/adjusted to suit. If you want to try any of my packs for size then just say - will happily see if they fit with you Tom

Very kind offer Chris, I may just take you up on that

[mark christopher]

Originally Posted by Tom3012

its simple, they dont fit as is, you have to make some modifications. Hope that's clear?

Tom

so they can be made to fit, no problems then as here http://www.oople.com/forums/showpost...9&postcount=20 you say they "wont Fit"

Originally Posted by gargadud

Hi Guys,

I am considering to purchase this TrackPower 4800 saddle packs.

Just wondering if it has a balancer port or if you have to load each cell individually (hope it's not a silly question )

Thanks

has a balance port built into the link cable that is included in the pack

[turbo_brick]

They'll fit in the pred by moving the servo and battery posts back by about 5 mm. You then need to find a micro reciever to fit in the small space left.

Peter

[Si G]

Can anyone confirm that the balancing port is the same size on trakpower and orion LIPO packs?

[ianjoyner]

On Modeltech's site they say that the TrakPower balancing harness also fits the Orion packs. So I guess that means the Orion balancing port is the same.

[mark christopher]

Originally Posted by Si G

Can anyone confirm that the balancing port is the same size on trakpower and orion LIPO packs?

yes 100% same both 2mm tube/bullet connections

[DaveG28]

Can I use the trakpower balancer with the Orion charger? Or do I need the trakpower charger also?

[jayst]

u shud be able to m8