|
||
|
 |
|
||||||||||||||||||
|
#1
15-03-2008
|
|||
|
|||
tekin bc 112 c question
a buddy of mine is trying to get back into racing and all he has for a charger is an old bc 112 c. someone gave him a pulsar but he doesn't have a power supply to run it. my question is the bc 112 c has a supply built into it to power it and the bc 112a. i'm trying to figure out which plug on the back is for the 12 volt cord and which plug is for the bc 112 a so i can plug the pulsar into it and use the 112c as a supply . any help would be greatly appreciated carl
|
|
#2
18-03-2008
|
||||
|
||||
|
is this any help http://www.rcdocuments.com/?page=1 or this http://www.teamtekin.com/forums/topic.asp?TOPIC_ID=1221 if the 112c has software h31 it will charge nimh's very well, i've just checked my 112a and it has a tamiya 6v connector which can supply other products (i changed the power 'in' plug a long time ago!)
hope this helps
|
|
#3
26-03-2008
|
||||
|
||||
|
You might want to be careful here... the Tekin 112C's internal supply delivers over 20 volts DC... which might be too high for some chargers.
__________________
Speedmerchant | Airtronics | Putnam Pro-pulsion | Fister Racing Lube
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
