XRAY XB2

[Callum]

Just what I wanted to hear!

[xfactor]

I trimmed about 5mm off the top and down the front side (bit that goes down the front side window) if you understand that....

Keep the bottom as the original cut, and you will find them perfect...

[Callum]

Well I’ve just taken delivery of the RF2 and wow

[Callum]

XB2 Arrived today courtesy of John @ Rc Octane Top service!

Let the build begin this evening 😀

[xfactor]

Is it built yet.......

[Callum]

Straight home from work then in to the Garage only got an hour or so on it

[xfactor]

Hi all,

Thought I would share this, as it may help some of you that don't know, like myself. Some of you may already know.

Having used Rate in springs, I wanted to know what the Dot/Dots compared to against the Rate, so I have an idea when changing XRAY Dot springs.

After searching I found the comparison of the Dot to Rate.

Front.

1 Dot - 3.3
2 Dot - 3.7
3 Dot - 4.1
4 Dot - 4.5

Rear.

1 Dot - 2.0
2 Dot - 2.2
3 Dot - 2.5
4 Dot - 2.8

[Pedros20]

Hi all, I’m in the process of getting the RF2 conversion soon as Willspeed get them back in stock, & wondered if anyone has a basic setup for EOS carpet?
I know the car is relatively new & it’s been outdoor season but thought it maybe worth a try.

Thanks in advance

[xfactor]

Hi Pedros20.

As for the set up for EOS Carpet. I would contact Will at WILLSPEED. Before the release the RF2 was ran/tested on carpet and Will is awesome at getting back to you with any info for the RF2 ....([email protected]) ......

[Pedros20]

Yeh ok will do that, his communication has been great so far.
Just wanted to get the shocks. Diff oils, suspension holders all build up ready for my kit coming, 👍🏻😎