Core UAC 50 charger help.

[Spils77]

Hi All,

I have just got back into the RC scene and a lot of things have changed regarding batteries and charging. I used to run NiCad saddle packs which I charged using a Schumacher PC3 charger. I have just purchased a Nimh battery just to have a play with the car before I take the plunge into the Lipo battery technology. The purchase of a Core UAC 50 charger made perfect sense as the charger can accommodate all battery types. I have read the manual but it is not very clear.
I am using a Nimh 3300mah battery so I would imagine I would charge the battery at 3.0Amps?
Also do you need to run the discharge/charge cycle and what settings are best to use?
I am guessing I set the discharge current to 1.0A but what do I set the final voltage too for this battery?