3D Printed Off Road Ride Height Gauge on Thingiverse

[Paul Seddon]

Hi All,
If you have access to a 3D Printer, I've just done a 1:10 Off Road, Ride Height Gauge and posted the file on Thingiverse.

Ride Height from 15mm to 25mm
When sliced using Cura, print time in PLA 2 Hours, 09 mins @
0.1mm layer height
1.2mm Wall thickness
20% fill
50mm/s print speed.
15 grams of material

http://www.thingiverse.com/thing:646043

Will print one tomorrow and post the photos