Go Back   oOple.com Forums > General > Electrics

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 22-12-2014
wookieewonder's Avatar
wookieewonder wookieewonder is offline
Member
 
Join Date: Sep 2012
Posts: 80
Default Car glitching, indoor racing

Hello I'm after some help on solving glitching problems. Car has been fine racing outdoor all season untill moving indoors were it has a slight intermitant glitching problem. Every few laps the throttle will stay on for a fraction of a second too long or the steering will cut out just momentary. It only seemeds to happen at indoor venues. Outdoor meetings it's fine and on the bench in my house / down the local car park for a test run it never glitches , not even at a large range .

I've fitted a power cap to the rx, this has stopped the steering cutting . Have lowered the esc punch too from max (9) to 7 seemed to help a bit. It seems to happen the most after a straight on the track. I'm on 2.4gh (flysky fs-gt3c) trackstar 120a, turnigy digital brushless servo , trackstar 8.5t,

Are rc cars more prone to glitching/ radio interference when racing indoors? Thanks you for any advice
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com