Alcyon's Optima Mid and Lazer Performance parts

[alcyon]

Tested layshaft with associated 87t spur and it was smooth with no wobbles.
so i reccomend use of associateds sc10 93t pinion and use vts.
the rw may work better with vts but cant confirm now as i havent receive vts.
production of layshaft will start tmrw.
i noticed that the problem with standard b4 slipper is the area where spring is supported is too small.
even with my best efforts of pressing in the outer plate and tigthening the spring ..while will net me with a wobble free spur, after a hard impact the spur and plate will not spin true again.
i looked at the vts design and i am pretty sure it will solve this problem.
i have asked the machinist to make 10 layshafts. These are now ready for everyone. will be out in less than 2 weeks.