Yokomo Works projects

[Lowry]

Hi,



about 1 year ago I bought a strange Yokomo Chassis:

• the chassis was from the Works 91
• The front & rear gearbox and the shock were from the Hotdog
• Additionally the steering and front suspension reinformcement was from the Works 93

I was missing mainly the front shock stay and the rear shocks to bring the whole thing at least back to life = drive.



The I stumbled across a Works 93 10 days ago and could not resist. It is in overall good condition, only problems are:

• On one rear shock the piston shaft was bent; I replaced it with a Kyosho part
• And the rear diff and the rear belt were heavily used.

In the meanwhile I found some rear shocks for the Works-mixture-project. They were in awful condition but I could bring them at least to no-leaking-life.



Now I am still searching for:

• rear diff gear ZC-503 with 35 teeth
• one rear belt ZC-656
• One front shock stay ZC-710S

At the same time I have quite some parts that I do not need:

• A new body for the old Yokomo "Superdogfighter": the rear body post hole was changed to an "open slot" and a fine breakage is also there; however it has still the protection tape on
• Numerous battery posts
• 2 steerings for the Superdogfighter or Works 91
• Several wing mounts
• 2 used wide yellow rims for I think YZ 10

I also realized that the Works-mixture seems to have an aftermarket-shocktower:
It has 8 holes for the mounting of the rear shock. If anyone is particularly interested in this part- no problem.

It would be great if anybody could give me a hint where to source the rear belt and the rear diff gear (35 teeth).

Thanks everyone and have a nice Sunday

Ralf