|
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]()
Well it was inevitable really. Once another rc hobby kicks in its bound to cost. Iv not actually put any pics up of my quads but those that know me have seen half built half finished quads and finally it feels like im getting somewhere now.
A small recap for those that don't know me, I was unsure on what I wanted in a quad and so bought 2, a dji550 and a Tbs discovery. A visit to quadcopters revealed a fantastic 550 for smooth aerial vids and a disco pro for fast fun fpv. I decided to be sensible and get a 550 and upgraded the motors to torxpowers as they had a good review and seemed excellent quality. Due to having young children, money was to be spent evenly over a while to get all the stuff I need. I initially concentrated with the 550 and bought everything I needed to make it fly such as :- Turnigy 9xr 3 x 4500 4s lipos Torxpower motors dji 30a esc's Frsky module and receiver Various props Naza lite with gps All the accessories needed to make it fly. At this point a thanks goes out to Mike - Northernmonkey and Andys for there help and advise along the way. Also Mike showed me some of his setup and I realised that this is not only a fantastic hobby but also a moneypit with impressive machinery . I had previously bought andys 330 and ran that for a while along with the smaller toyish quads and helis which were all sold on to a friend. That was a steep learning curve going from a wltoys 959 quad with camera to a 330 that looked like it was flying at 100mph on full pelt. Small 330's are stupid fast ha ha.
__________________
TRF 501x - Tamiyafied Madrat - Bograt Rc10 FT T4 RC18T Lunchbox Gold X-6 squared Lrp, Novak, Robitronic, Ko Propo, Ezrun , Trakpower ,Team Scream, Demon, Microtech, Dms, Good old Jezza, Je-Spares, Bolton Model Mart, My Feedback http://www.oople.com/forums/showthread.php?t=25199 |
Thread Tools | |
Display Modes | |
|
|