shock set up on dex210

[Loheswaran]

Can you help me.

I used the pistons as per kit set up (6 holes I think) with the kit springs blue front and rear, along with the rest of the kit set up with MM4 motor mounting. I used 30 wt front and 25 wt rear

When I raced at maritime I found that the car would sort of nose dive into corners, and when I was going over the table top it could nose dive on the exit and roll.

I have done a shock rebuild and put 4 X 1.2 holes at the front and 4 X 1.3 pistons at the rear. The oils are 30wt front and 25wt rear. On the bench the car, in relative terms, seems to be soft and reactive on the back but really slow up front.

I know that the bench is not the track, but am I going the wrong way?