FOR SALE Hobby Wing Xerun V3.1 Blue 120A 2S & HobbyWing 2 in 1Multifunction LCD Program Box Xe

[dbooker]

Great ESC & easy to use Programme Card, only changing as changing to 1s ESC

Free Postage £120 Buyer pays fees (£124.28)

Hobby Wing Xerun V3.1 Blue 120A 2S
Version Number: 81020350
Strongest: Most advanced software functions
Simplest: Built-in electronic switch saves chassis space
Easiest: 10 Pre-set profiles for Plug and Play
Most Reliable: Innovative heat dissipation structure

Advantages of XERUN-120A-V3.1 speedo
-Aluminum bottom case improves the heat dissipation (The previous V3 speedo uses plastic bottom case);
-Improved heat-sink with 1mm gap between the cooling fan allows more air flow to reduce the temperature of speedo;
-Improved dust-proof design. Rubber rings are applied at the sensor port and the program port;
-Aluminum screws of cooling fan look better and more professional;
-Improved electronic switch has stronger current endurance to be more reliable;
-New firmware allows driver to adjust the throttle neutral range, and solves the "turbo lost in high temperature" problem in the previous version firmware.

Specification

XERUN-120A-V3.1

Current

Continuous: 120A, Burst: 760A

Input Note #1

4-9 cells NiMH/NiCd or 2-3S LiPo

Built-in BEC

6V@3A (linear mode)

Resistance

0.0003 Ohm

Motor Supported

Sensored and sensorless brushless motor

Suitable Motor

With 2 Lipo or 4-6 NiMH
1/10 on-road: >=3.5T, 1/10 off-road: >=5.5T

With 3 Lipo or 7-9 NiMH
1/10 on-road: >=5.5T, 1/10 off-road: >=8.5T

Suitable Car

1/10,1/12 all competitions
1/10,1/8 rock crawler

Cooling Fan

5V

Size

37.5mm(L) 31mm(W) 29.5mm(H), excludes wire connectors
37.5mm(L) 37mm(W) 29.5mm(H), includes wire connectors

Weight

93g

Note #1
For 4-6 cells NiMH/NiCd or 2S LiPo, the standard cooling fan needn't be changed.
For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan needs to be changed to 12V high voltage fan.

Features

2.1 All in One. Up to ten profiles can be stored in the memory and imported or exported easily. Factory pre-set profiles include:
Blinky mode, Modify Mode, Stock mode, Practice mode, Offroad mode, Drift mode, Crawler mode.
2.2 Built-in Electronic Switch, long life and high reliability, also saves space on the chassis.
2.3 Aluminum Upper and Bottom Cases with optional colors, giving better heat dissipation, and allowing higher current.
2.4 External Programming Port (EPP), easy to connect and also a power port for additional fan.
2.5 Advanced Dynamic Timing technology, providing more customization possibilities for highest level competitions.
2.6 Precise throttle and brake control, setting of drag brake and brake strength with more options, new punch and brake rate control functions, and throttle and brake curves through the PC client.
2.7 Integrated Data logger, recording the maximum temperature of ESC and motor as well as the maximum RPM, using LCD Programming box to check easily in the pits.
2.8 Multi Protection Functions, making your running safe with ESC and Motor overheat protection, low voltage cutoff and throttle signal loss protection.
2.9 Easily programmed with the Multifunction LCD Program Box and USB Link Software
2.10 New USB LINK Software graphic interface, providing extra parameters for advanced settings.
(Note: The V3.2_121204 or later version USB Link Softwarer is stongly recommended for XERUN V3.1 ESC)
2.11 ESC firmware can be updated through the USB adapter in the LCD Program Box.

Instruction Manual

HobbyWing 2 in 1 Multifunction LCD Program Box
For XERUN and EZERUN speed controls
Part: HW30502000014
Specification:
This Advanced Program Box is used to set the programmable parameters of brushless ESC,
It has a 16*2 characters LCD (Liquid Crystal Display) to get a friendly user interface,
so you can set the programmable parameters very easily.
It is pocket-sized, so you can bring it to the racing or flying field conveniently.
This program card is suitable for the following ESCs:
1. XERUN Series Car ESC (Version 2.0 and higher)
2. EZRUN Series Car ESC (Version 2.0 and higher)
3. PLATINUM Series Helicopter/Aircraft ESC
* Size: 90mm (L) * 51mm (W) * 17mm (H) * Weight: 84g.
* Input Voltage: 4.8-6V
(If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box)
Working Mode :
Working as an individual device to set the ESC,
the value of each parameter is displayed on its own LCD.
Working as an USB adapter to link the ESC with a PC,
user can update the firmware of the ESC or set the ESC by the special application software on PC.
Programmable Items :
A) The programmable items for the CAR ESC are:
* Running Mode
* Drag Brake Force
* Low Voltage Cut-Off Threshold
* Start Mode
* Maximum Brake Force
* Maximum Reverse Force
* Initial Brake Force
* Throttle Neutral Range
* Timing
* Over-Heat Protection
* Motor Rotation
* Lipo Cells
B) The programmable items for the AIRCRAFT AND HELICOPTER ESC are:
* Brake Setting
* Battery Type
* Low Voltage Protection Mode (Cutoff Mode)
* Low Voltage Protection Threshold (Cutoff Threshold)
* Start Mode
* Timing
* Governor Mode
* Motor Type
* PWM Frequency
* Built-In BEC Output
* Motor Load
* Lipo Cells
Package include:
1x Advanced Professional LCD Program Box

Mimage4.jpg