CVA dust boots on your b44/.1/.2

[Danny Harrison]

Thought I'd share this. Its maybe been up before, but it seems like a good purchase.

They fit real tight and are very stretchy. I put a load of black grease in the cva, pushed the dust boot all the way upto the cva, turned the end of the dust boot inside out and pushed up as close as I could.

Then I cleaned the boot with kitchen roll and motor cleaner to remove any black grease. I put a tiny bit of thread lock on the outer of the cva to hold it tight. (maybe not neccessary/bad idea?) Then just folded it over. The finish looks good.

Part number is TD310023 team durango 410 option part. Should be good for invernational where the dust can wreak havok with them