|
#1
|
||||
|
||||
![]()
Just finished building my 22sct, fitted all electrics, looking good. but then I went to fit the under body that I ordered with the truck, I used to run one on my blitz and it was a god send in the wet! so ordered one straight away for the 22, now the blitz one had loads of room under it for the eletrics and was fantastic.
I would love to meet the person who designed the one for the 22sct and ask WHY!! you needed to make the damn thing so low, it's not got to be that aerodynamic, it's under a bloody great big lexan bath tub, it's so tight to fit that the link wire on my lipo sadle packs is to high. the middle part of the body is ok and has enough hight for the fan on my esc, but then they make it drop away at the sides so it's worse than a 22 car, and they are bad enough. come on TLR the 22 is so tight for space that most find a diffrent shell why oh why does it need to be so tight on the 22sct? we should be able to have bags of room under there. Americans are supposed to always think big! a sodding cut in half coke bottle would work better EDIT: just to add I ordered TLR4142 chassis dirt cover it's the only one I could see on the TLR site, fails to mention it's really cut for rear motor with the battery running straight down the chassis, no thought if you are using mid with the saddle sideways configuration
__________________
Dave www.norfolkbuggyclub.moonfruit.com kyosho optima,Bosscat,Boomerang,,RB5 Vega,RB7,,RC12 5.2, TLR22-4,MP9,HB807T Flask of tea & a rollup Anglia model centre & CT Models http://www.oople.com/forums/showthread.php?t=28117 |
Thread Tools | |
Display Modes | |
|
|