DB1 questions :)

[Ross]

I've bought a used DB1 and have a few questions to ask.

I've had to change the drive shafts as there were very warn, when rebuilding the cari noticed that the RHS rear arm was sitting lower than the LHS. I've measured the length of the shock bodies,shock shafts as it sits on the stand, the top plastic caps on the shocks and they all match each other,I'm baffled as to what can be the problem. Can some one help.

The rear front hinge pin holder (on the rear end if that's not clear ) was loose and moving, is this a common issue or just down to screws not being checked. Also when removing the rear end the anti squat shim came off as well but there were also 2 washers,now these look like they go between the chassis and the gear box, is that correct.

I would like to print of diagrams and part number listings for both standard cars used for the kit, i had a look on the net and couldnt find anything that help me,does anyone have a link for these please.


Cheers
Ross

Here some pictures of the shocks








The drive shafts are also equal in the out drives






And here's a vid of the holder moving

http://videos.smugmug.com/i/Hobbies/...il/master.m3u8