Team Tekin Q&A

[f888fhw]

Hi Randy,

Just to confirm the software is 223.

The motor is brushed (G2 24T), the input is 4 cell NIMH (4300), I use Forward Brake and delayed Rev.

I have zero brake effect and i also have a problem with acceleration. If i give it full acceleration the esc shows i have full throttle (full flashing lights on the esc) but with no output at the motor. If i very slowly accelerate i can achieve full throttle.

Yes the ESC is showing brake movement.

Any help would be appreciated.

**EDIT**

The esc performs well with the same setup with the voltage switched to 2s and a 2s lipo. It must be something to do with the 4 cell input voltage?