Go Back   oOple.com Forums > General > Electrics

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 17-09-2012
Chris Elworthy's Avatar
Chris Elworthy Chris Elworthy is offline
Senior Member
 
Join Date: May 2007
Location: Bolton
Posts: 707
Default Speedo control cutoff problem

Alright lads,

I'm new back to racing and am experiencing some rather strange problems with my speedo or possibly motor. I'm using the Speed Passion GT2.0 speedo with Thunder Power 7.5 motor in my Losi 22.
What is happening is, around 4 minutes into the race the power from the motor will cut and the buggy will grind to a halt, the steering however is not effected. If you then switch the speedo off then on again the car is back to normal as it was before the cut. The speed control has recently been returned from Schumacher as I thought it was faulty earlier (turned out to be a faulty transmitter) so has been tested and is supposedly fine.
Other observations are that the fan had stopped working the first time I noticed the cut in Power and hasn't worked since, this shouldn't be too much of a problem in a 2wd though.
I've been back to the setup box and reduced the voltage cutoff to 2.8 and alsO tried a reciever capacitor but no joy.

Has anybody an idea of what could be happening? Is it possible the motor could be damaged causing the issue? I doubt it matters but the car is being powered by Orion 90c 5500 Lipo's which are brand new.

Has anybody got an idea of what may be the issue? Its a really frustrating problem as you only know you have it when it's too late



Chris
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com