New Lazer FS2 owner!

[kaszal]

I've nearly finished rebuilding my second-hand Lazer FS2. I'm not familiar with Kyosho and I have a few questions below. Forgive me if these are already answered elsewhere, please post a link if you have time.

1. Is it normal for the rear springs to rub on the cylinder? I'm using new springs and the shock bodies don't appear particularly worn. The fronts are super smooth.

2. What's the easiest way to adjust the slipper when assembled? There's not much room in there!

3. There's quite a bit of lateral weight imbalance e.g. on the right there's the motor, receiver and transponder (196g) and on the left there's the servo and speed controller (86g) That's 110g difference. I realise this is a rough figure because I haven't considered the distances from the centre line. I'm tempted to add a block of brass by the speed controller.

4. Are the 3-Racing turnbuckle mounts (link below) a direct replacement or are different spacers needed on the camber links?

http://www.ebay.co.uk/itm/3racing-Al...item3a7838593f

Thanks for any help provided. Photos to follow.