|
#1
|
|||
|
|||
![]()
Yeah so i didnt do all the research i should have done when buying this system, i bought it last year, it was last couple of units that were still on sale after it became discontinued.
Now after getting to grips with RC cars and my confidence building i took it to Slough track and noticed my DEX 410R was cutting out on the far right of the track... Though after visiting the track some more i didnt have an issue. Now i got y 1/8th tried driving it 20m and it cuts out and goes into failsafe. Using a SR3520 RX. Swap in my old SR300 from my Xray T2 and i get about 35m before cut out, far enough but still thats pretty bad isnt it? I opened my DX2.0 up and its a Revision E, so one of the later releases i think. Any tips and tricks you know that would help i would appreciate as there are absolutely tons of posts regarding the DX3.0 (probably why i didnt pick up on the issue in the first place) of range problems. I think sadly my warranty will not work as i did the mod to convert it to a DX3.0 but i might be over 1 year too. Im at Uni so dont get that much time and didnt realise this was a big issue till my 1/8 cut out very very early down my street in both directions ![]() Currently testing and my battery is at 10.5v, that shouldnt have too much effect should it? |
Thread Tools | |
Display Modes | |
|
|