210 Gear DIFF

[hottuna]

Originally Posted by Andrew Twigger

how tight the gearbox screws are can affect how free the drivetrain is.

Once assembled, mine would happily roll freely on the floor and so I would expect the initial tightness by hand will reduce once run. If anyone is in doubt then best not to run it in my opinion.
HTH

I know it depends on how hard you tighten the gearbox and that it will effect the gearbox.
But with the gear diff it makes no difference to me. If i put the housing together without the screws, it's really hard to turn the layshaft by hand.