Quote:
Originally Posted by spud31
i would put the standard rear uprights on to reduce the toe.
In position 1 put a 10 gram weight to help the iniital steering.
http://www.trfracing.co.uk/page_1265126433672.html this is lees setup from taplow.
He runs a shorter front link than you to give more steering, id also try front pins ior if there too much yellow mini spikes rather than normal staggers.
Cut staggers may also work |
anything other then staggers make the car to twitchy . mini spikes will try them!
i will try the 10gm in position one and 25degrease C hubs and see how it goes !
30-01-2012
Tamiya
Threaded Mode