Ansmann madrat/Macnum idlers

[daveyboi1973]

Hi everyone.
Im pretty new here,was sent over from the msuk forums,to tell you about my next little project.I originally made the hardened steel brushless gearset for the royal flash and have sold many of these on ebay.After a prolonged illnes im back and have turned my focus onto the madrat/macnum range.I have seen and experienced the problems of especially the idlers in the gearboxes and have looked at this first.

I know there are now a few options for these idlers,and have tried all of them too.However,i think offering my version done in case hardened steel is a way to add to the choice too.It is really for bashing,as im not a racer,but i guess it will cover all applications.

They are identical to the stock idlers,so direct fitting is no problem.I can say these will be very hard to break too.Initial test was done in a macnum with a 5.5t motor on 3s and all i managed to break at full start punch setting was the left driveshaft.(doing donuts on tarmac).

The gears will be available mid january (ish) depending on the last tests,and price is £10 posted each,and £18 for two.

These are not cheap,as i cant get big batches done,and they are hand cut and finished here in the UK.
Ill post some pics after testing and more info.
cheers
dave