SP V3 10.5t & SP 2.1 ESC

[carlin]

Hi Guys,

Right this weekend is going to be the first time I have ever run SP ESC & I'm little bit worried don't want to fry anything.

All these functions are newbie to me worried I may have it set wrong or need to change it.

Right so this is what I currently have setup -

Software: V1.07_110119
1: Running Mode = For/Brake
2: Drag Brake = Custom 11%
3: Voltage Protection = 3.0V/cell
4: "DRRS" Punch = Level 3
5: Brake Force = 62.5
6: Reverse Force = 25%
7: Initial Brake = Drag Brake
8: Neutral Range = 9%
9: Boost Timing = 0
10: Turbo Slope = 24
11: Overheat Protection = Disable
12: Turbo Timing = 0
14: Turbo Delay = Off

The car is RB5 SP2 with SP V3 10.5 with 27t pinion which is what I worked out on due to the size of the straight.

The spur on the RB5 is 78t too.

What else do I need to do or shall I just see how things go?

With this setup will it give me more top end speed or do I need to change something on the settings?

Just worried may have it wrong just wasted my monies

Thanks